I'm about to swap my DS-7608NI-I2/8P for the new DS-7608NI-M2/8P.
If I swap the HDDs over, will all the recordings be available to the new NVR or must they be re-formatted?
Good news, Dan!
I gradually reduced the Max Bitrate for all the cameras, until at 2048 Kbps for each of them the 5th video appeared. And the 2 garage cameras are back on the Powerline now without any trouble.
I don't know what ramifications, if any, the reduced MaxBitrate will have?
I'll try...
Hi Dan
I've now got all 5 cameras connected directly to separate ports on the NVR.
Unfortunately I'm still only seeing the video of 4 cameras and getting the “No enough network bandwidth” error on the 5th.
Thanks Dan
I've removed one of the cameras connected to the Powerline, brought it indoors and connected it directly to an NVR port. Still the same 2 problems. I had to connect it manually, guessing its IP address and then getting the “No enough network bandwidth” error, so I'm still unable to...
Hope this helps!
Please see attached photos for camera device models. D5 which won’t connect “No enough network bandwidth” is DS-2CD2185FWD-I 8MP 2.8mm fixed lens dome camera.
Also attached is a scruffy (apologies!) diagram of my system layout.
Cameras D1: Rear, D3: Front Zoom, D4: Front are...
Hi Dan
The troublesome cameras are randomly selected!
Having just re-booted again, I can see the 2 Devolo-connected cameras, and the one I had to change to manual instead of plug n play is giving the error message "No enough network bandwidth".
Last night it was a different pair.
Hi Dan
Thank you very much for helping me.
I have now performed the upgrade steps you suggested.
What happens now is that, again, 4 of the cameras (all 5 are set to only HD (1920x1080) resolution) are assigned plug n play IP addresses, and the 5th one I had to set to manual and run through...
Hi!
I’m a newbie to this forum, but I’ve been struggling for months trying to solve a couple of problems by myself, and so would really appreciate some help.
I have a DS-7608NI-I2/8P 4K capable NVR on firmware V4.22.005, Build 191208.
I have five Hikvision 4K capable cameras, all on firmware...