Recent content by FreddieFire

So, despite thinking I had the latest NVR firmware I double checked and managed to find a more recent version in 2023. So far this has fixed the issue...

Same here, I have exactly the same issue. I'm convinced the connection threads are not being closed down by hikvision's software and this is the root of this problem.

Update: Comparing the female RJ45 socket from the camera to one of my other cameras it appears that the 'flat connector PIN' is unique to the faulty camera. So this must be what is causing the issue. There appears to be no obvious way to allow the pin to pop back up, even using contact cleaner...

Thanks JB1970 for your prompt reply and assistance. There are no activity lights on the network port, in fact I have changed LAN cables to rule out the LAN cable being at fault. Within the NVR interface, PoE config shows this camera as consuming power, on the main camera config page the camera...

Hi, one of my four PoE Hikvision DS-2CD2342WD-I turrets has suddenly become inaccessible from the mobile app, direct on the DS-7604NI/E1/4P/A NVR and using SADP. I hadn't changed anything to prompt this fault occuring. Firmware was all running on the latest versions across all cameras and NVR...