Currently I have a master 'NVR - DS-7732NI-M4-24P' that I use from a different location. I remotely connect the 'DS-E04NI-Q14P' to it by adding its IP address to the master NVR and then selecting the 2 channels I want the Master to add. This works perfectly, allowing the 'DS-E04NI-Q14P' to...
Hi, just to give you some feedback, I have had the 'DS-E04NI-Q14P' for a little while now and the following are the advantages and disadvantages of it:
Advantages
Very small footprint, like a 5 port TP link Ethernet switch in size by comparison, so very easy to hide.
No fan, so completely...
On my NVR - DS-7732NI-M4-24P I have the latest firmware 'V5.02.006 - Build 240407'.
On the Web client for the previous firmware 'V4.61.430 - Build 231123', under 'Live View Settings', there was a 'More Configure' button. see attached screen shots.
This button has disappeared from the new...
Like most Hikvision NVRS, the DS-7732NI-M4-24P offers 3 export types directly from the NVR GUI.
These are as follows:
Default
MP4
AVI
Default:
On my previous Hikvision NVR, the Default would export Video / Audio and VLC information that was playable in Hik's own VSPlayer. Or playable in any...
It is my understanding that the IOS Hikconnect app only supports Push Notifications if the device has been set up through the Hikconnect cloud itself.
In other words the Hikconnect cloud is being used as the DDNS?
There is no way to get notifications using the Hikconnect IOS app, if the device...
I have 2 Hikvision NVRs.
Both NVRs using the GUI can export Video with Audio in the following formats:
Default - Videos need to be played in VSplayer, overwise there is not sound.
MP4 - Video can be played universally on all media player and also sound works
AVI - Video can be played...
Thank you for the excellent reply, of course I could always leave a lead in a unused POE port of the NVR and then put my laptop in its subnet range as you described and ‘Bobs your Uncle’.
Hik can sometimes overlook simple things, such as not offering 'Virtual Host' and capping the bit-rate when...
I did the following:
Left the POE camera connected to the NVR POE port.
Removed the Ethernet cable connected from the NVR LAN port.
Connected an Ethernet cable from an unused POE port of the NVR to the Router Switch.
Used SADP to change the IP address of the camera to the same subnet as the...
Actually, I did not want to change the bitrate on the camera directly on purpose because from experience, the NVR always takes charge. But no harm in trying, I will certainly try that. The only problem is that this mini-NVR has no Virtual Host mode (this has been verified by Hikvision). So, I...
If you look at the attached snapshot of the Data Sheet for the DS-E04NI-Q14P Hikvision NVR, you will see that it has an incoming bandwidth of 40Mbps and outgoing bandwidth of 60Mbps.
The problem is that this NVR does not let you set a max bitrate of over 3072, an error message pops up stating...
So with the second question you asked, they mean connect the camera to the network directly and using the SADP tool to configure them and then plug that back in to the Mini NVR. A bit of an oversight on Hik's part, but thank you for following up so quickly.