Recent content by J.J.B.

I think perhaps you are right. Is it a question of defaulting the cameras and starting again, maintaining IP settings etc? I do want to be able to control the alarm output from one camera to turn on an LED light, and choosing the alarm output from the NVR, using the relevant camera's IP address...

Thank for this, I was trying to get my head around whether to make the changes in the DVR through the browser or the camera, but this makes things clearer. That said, the DVR doesn't appear to have as detailed Image settings for the IP connected cameras (not direct into the back of the DVR) as...

I apologise for hijacking this thread but I'm at my wits end with my super-duper new DS-7608NI-M2 / 8P DVR and DS-2CD2386G2-ISU/SL cameras. No matter what I try, setting up just basic event motion detection in the camera or the DVR, I am not getting any playback files on the DVR. I do get...

I've connected my 2CD2386G2-ISU/SL to an LED floodlight via a photocell using a Solid State Relay (SSR) and it was quite an adventure. First off, the camera doesn't output any current from the alarm outputs, which on the 2386G2 are marked IN|G|A1|B1 on the plug. I figured that G and A1 were the...

I'm having a related issue. Ever since I put SD cards in my Accusense cameras, they are recording fine to SD but the DVR is not recording anything. I've turned off Motion Detection in the DVR, since I don't want to take-up disk space with water vapour from the neighbour's boiler flue or leaves...

This is with a DS-2CD2386G2-ISU/SL running 5.7.12

Hi @Dan, Not the NVR, this was just looking at one of the cameras via its IP address on the iPhone. I've not tried to view the NVR via the phone.

Thanks @Dan, There are certainly some oddities between the Mac experience and the PC one, even between MacOS and iOS. For example, when logging directly into a camera, there is no Playback or Picture menu option on Safari for the Mac, just Liveview and Configuration, compared with the iPhone...

I was recently given a DS-7608NI-M2 / 8P as an upgrade to an older 7600 K series I've been using for almost a decade. This came about because our security was recently beefed-up by three Accusense 8MP cameras to add to our recently upgraded 4k Darkfighter, which was a revelation for image...