Recent content by jacko02

thank you very much

hi thanks for all your help i think i will buy a new hard drive and use the old nvr with the 2 cameras i can't get to work , have you any idea what the red sign is on the top right of live streams many thanks jack

attached is a 2 photos of present settings. the top 2 are the same make and model (new cameras) 3rd is jennov 4th is bullet camera the 1. 2. 3. 4. is for both photos

yes they are the 2 not showing ( have a tool which shows them ) when i attach them to the nvr they get assigned a ip dress 192.168.254.xxx one of the new cameras still has a audible alarm which activates every time there is movement but i can't access camera to switch it off, the jennov camera i...

hi dan The PoE switch was plugged into your local network. my pc was connected to the network directly last night i managed to get one of the old cameras (jennov ptz) connected to the hikvision nvr. the other 2 cameras are securicam bullet cameras (see photo ) ,

hi i have tried the help you suggested above with varying luck For the 3 old cameras that i disconnect them from the NVR, i plugged them into the PoE switch i then opened SADP i could only see 1 camera i changed that camera's network details to the subnet range of the NVR i then tried to...

hi thanks i managed to enable virtual host i will try the other help you provided when i get back

hi i have tried to connect virtual host but there is no advanced settings

hi thanks for help i will try to connect to virtual host but i have not seen that option the nvr i have is hikvision model DS-7608NI-K1/8P

hi dan on the old nvr i used a poe injector (4 ports) for 3 cameras then a cat 6 cable to the nvr, with network cable to nvr, on the new nvr i connected the 3 old and 2 new cameras to ports on the nvr and network cable to nvr , they all said connected but only the 2 new cameras had a...

Hello i have replaced my old NVR for a hikvision 8 channel On my old NVR I had 3 cameras ( 2x bullet 1 ptz), all were connected to the NVR via a POE injector. i then bought 2 new cameras (ptz) so needed a 8 channel NVR Since changing my NVR I can only access the two new cameras, the...