Recent content by Leodan

Hi - I took your suggestion and it did solve the issue, thanks. I'd forgotten about that option. I had tried using Task Schedular, as you also mention, but it didn't work - I must not have done it properly.

Since installing iVMS4200 Client (3.12.2.3), my Windows 10 startup is interrupted by UAC asking permission to load LocalServiceControl.exe. This slows startup and I would like to know how I can get UAC to ignore \ accept this service and let windows startup without my intervention. I got fedup...

Interface tells me Firmware is "up to date" with V4.83.010 build 241118. All the cameras are "up to date" on V5.7.11 or 18..... (varies). Is it possible to "upgrade" the NVR firmware to V5?

When viewing a camera feed on Kik-Connect (Android), I see several camera control icons that I am unable to locate on the NVR interface (DS-7616NXI-K2/16P NVR). For example: > Alarm Output > Compensation Light Configuration \ Supplement Light > Noise Reduction Level > Defog Mode These do not...

Thanks Dan, I have just responded to Sportster's suggestions. I have some cameras which can be connected to POE ports, and others that come in from a POE switch which is in another building. I am working on how to incorporate those - Subject of another thread.

Thanks Sportster, I tried Device Access on Chrome, and I don't see the MAC's. So maybe it is a v5 thing. I can slso see the serial numbers on a 1080 monitor, but they take up so much of the total width, that it's still a challenge - Even showing the short serial numbers would be a big...

Hi Dan, That's OK once I have setup the installation, but in the configuration process, I really want to know on which camera I am setting the IP. If I have more than one of each model of camera, then I have to look at the serial number to know which is which. But the serial number is too long...

I am finding it difficult to configure cameras using my Hikvision NVR's standard interface. The problem is identifying each camera by it's fixed ID: MAC or serial number. The Camera Configuration table interface does not show MAC's. It does show serial numbers, but only the long serial numbers...

I am having problems sourcing a speaker & microphone to attach to my NVR for sound monitoring and 2-way communication. My NVR (Hikvision DS-2CD2387G2P-LSU/SL) has 2 RCA ports on the back: Audio In and Audio Out, but I am unable to find any recommendation or source for a simple speaker and...

Thanks - Think I'll give it a shot - As long as I can get it on a trial basis. It may be more expense / hassle than it's worth but pricing and trial availability seems to be a mystery - At least until you sign on :).

I am already sharing the connection with family (on mobile devices), so it's surprisng I can't get access on a PC without having to subscribe to what sounds like a heavyweight management service. I'm having some success using iVMS - Very cludgy so far - Probably my ineptness.

I have a DS-7616NXI-K2/16P NVR with several Hikvision cameras attached. I have enabled Hik-connect access, and setup Hik-connect on my Android mobile which appears to have full functionality, with control of cameras etc. Now I am trying to get similar access from a PC, using a browser. I am able...

Thanks - 12-15FPS is not gonna kill me anyway :)

Thank you very much for the helpful suggestions. I am still trying to find the time to move forward on this installation, and reading up in the meantime. I mean to give this a try, although saturation may be an issue since I will be connecting 4 cameras, 2 of which are panoramic (180).

I have Nikvision NVR (DS-7616NXI-K2/16P) and various Hikvision cameras (dome, panoramic, bullet). I setup the NVR using the installation wizard (i.e. accepting the default addresses etc). My NVR is connected to a router with internet access, and, when connectd to the NVR ports, I am able to...