Recent content by LoinKing

I'm in MENA region but I usually download firmware from the Global-EN - because it usually has all camera/nvr models listed regardless of availability in local market. I did try switching to MENA and several other regions but it seems like firmware for certain products are gone now. For example...

I've been using hikvision's global website to download firmware for cameras/nvr (I'm not in EU), but it seems like they recently removed the firmware from their website. E.g. There used to be a firmware entry below the specs table: DS-2CD2387G2H-LISU/SL But now its gone. I tried search Support...

Yes, the hand-tightened nut. Its not doing its job, even after fully tightened.

DS-2CD2045FWD-I https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Pro-Series-EasyIP-/DS-2CD2045FWD-I/

I have a few year old hikvision bullet cameras. When new, I was able to tighten the locking nut and the camera would lock in place firmly. Now, it doesn't matter how much I tighten the locking nut, I can easily move the camera by hand. Is there a way to fix this?

Can you share links to JST-XH 2 Pin 2.5mm connectors for hikvision nvr case fan?

Are you using this alarm as standalone or is it connected/reports to a security alarm company backend?

I have NXI-K without POE, so just one case fan. I did see the posts about cutting off the metal grill to reduce noise, but some people said that didn't help them much. It might be best to start with a Noctua fan (running at low speed) to see how it goes. Our nvr is connect to our main room TV...

How did you fix the noise issue?

Any recommendation for anti-vibration rubber/silicone feet for NVR? It has metal feet and they amplify the noise when sitting on a hardwood shelf etc.

Looks like colorvu cameras are actually better at glare reduction: Link I did a quick experiment today and blocked the side of light fixture facing the camera. It didn't effect light output in the area much, but it did help reduce the glare effect on camera significantly (much more so then in...

Looking at the specs for 4MP, 6MP and 8MP versions of these and sensor size is same among all three. I'll be installing this camera in an alley and was interested in 8MP to capture details at a 5-10m area. But seems like 4/6MP would perform better at night, since sensor size is same? @JB1970...

Were you able to resolve your issue? I got H8c 2K it added in 7616 nvr easily. However, now I've noticed that while it displays fine in sub-stream, when I enlarge camera to full-screen, it goes blank. It's happening both, on Web View and NVR/TV, but on ezviz app and Ezviz Studio, its showing...

Figured it out. Its been moved under Applications Tab > Device Sharing

Had to update sharing settings but they seem to have disappeared on Hikconnect 6 iOS app. I can only share now, don't see the option to update sharing settings, view or remove sharing altogether?