Chrome still showing incorrectly, Settings below,
Here are the setting from the last time it worked correctly on the Chrome and TV HDMI.
Model NVR DS-7608NI-K2 / 8P
Firmware Version V4.32.116 build 220112
Encoding Version V5.0 build 211229
Web Version V4.0.1 build 211217
Plugin Version...
Hi All
After a few more tests and playing with Config, I would like to share the following with you all.
I added Internet Mode to Edge and set up the address
The result was all works fine on Edge, see below image and settings.
I have tried your suggestion adjusting the both screens, with no improvement.
Maybe I did not make it clear.
The TV and Laptop are both displaying the screen correctly.
The problem is not the display, but the area where the live display is, see examples below.
I have checked the TV setting and they are correct.
It has been displaying on the same setting since first installed, only in the past two months have this problem arose.
IF it was the TV, why is it the same on my Laptop.
Hi Dan
I changed the settings you suggested, from the 4K to 2K, this had no effect.
Bit the first image shows the live display before I load the LocalSeviceComponets, it is then that the display changes in both screen settings.
Hi Dan
I have you tried accessing the NVR with Chrome, Edge and Firefox browsers and it display the same in all browsers.
I have cleared the browser cache/cookies for all the browser.
Just to confirm, are you saying that the live view covers the top menu wherever you access the NVR from...
H all
Can any one help, See pic attached.
The live display on the NVR or TV HDMI or if go to camera direct, it makes no difference, the display covers the menu bar.
Device Model DS-7608NI-K2 / 8P
Firmware Version V4.72.107 build 220914
Encoding Version V5.0 build 220831
Hardware Version...