Recent content by VITOLIER

Your comments are interesting and I will try to research this issue. There may be a way to monitor the actual exposure time, by selecting in DAY/NIGHT SWITCH btw night, auto and auto-switch. I choose day however so the location of the camera cannot be detected (camera flash light). I attach a...

JB thank you for your comments which I rate very professional. As to the camera I use in this particular case I can adjust exposure from 1 to 1/100000 amongst 17 settings and tried various options. Needless to say the terrain matters and in my case moving fast at night for an intruder is...

Instead of auto-switch I recommend to set it on DAY.

My house is located next to a forest with a forest lane running along my house. That facilitated two years ago a burglar to climb a wall and penetrated into the building. That happened before I had my surveillance My video surveillance, not visible, covers the lane. The camera I use is the...

At the time you gave me your advice I was not at a level to understand the fundamentals, and it took my ageing brain some time to get familiar with the vocabulary etc. Since I lost a camera again I finally understood what you said at a time. Thanks again.

MY HIK VISION COLORVU DS-2CD2047G1-L, 6MM monitors a forrest lane running along my house. Since I was burgled from that lane I keep a watch using this camera. I was however not satisfied with the quality of the images taken at night. I solved the problem by fixing high above the camera a LED...

I finally resolved the problem. SYSTEM>LIVE-VIEW>VIEW. On the blue surface my 8 cameas are mentioned and each one must be ticked (X) In my case one was not ticked off, so I could not see it life.

Transmission of pics worked well until I started (not successfully yet) to install HIK-COLNNECT. Impossible to get back getting pics via e-mail. Below images related to my first success with I try to reinstall.

HELLO ANDY. All my eight cameras are installed but accessible. They are connected with CAT 5e cables. The length of cable vary from 2 m to 30 m depending on location of camera. If I add up the total length of cable feeding into my NVR THERE are about 250 m.I had no problem in seeing all cameras...

Andy, I followed yr advice. My resolution is already at min., my laptop is linked to the router by cable and I tried the icons at the bottom, camera etc.. No luck yet. Jack

Andy thanks a lot. Just read your message and will follow your advice. When finished will let you know the results. Your comments sound logic. Jack

I have full access to my NVR via WIFI (iPad) and by Ethernet cable (laptop>router) using HIK-CONNECT but in live view no images (9 grey squares). In left column all cameras listed. Can one help. Thanks. Jack.

Thank you Andy. Just printed out the HIK-CONNECT instructions so to have things in front of me. There is plenty of info on the web and I shall search. Will let you know how things got sorted out. Once again lots of thanks. Jack

Andy, I am not yet there. If the NVR keeps on being offline could it be that my settings are not correct. I.e.If so which settings are crucial and should be checked. I.E. TCP/IP in General As to your instructions in respect to HIK-CONNECT I have understood and tried to go through the settings.

Andy thank you. Will let you how I managed. Jack.