Search results

Just an observation - from your screenshots, it looks like Hikvision's plugin for your browser isn't installed correctly. Which browser are you using?

When you attach the power connector to the cameras (16 channel DVR setup) do you hear a soft click or see the IR lights briefly flash? Would you post a picture of one of the cameras with a focus on all of its connector cables. I'm wondering it there is a mode selector cable with a button. Can't...

Your phone with the right app should be able to accomplish that. Provided the NVR and your phone are connected to the same network (the WiFi signal would have to extend that far) you could disable the notifications with ISAPI.

Long shot - is your Panasonic TV running on a propitiatory OS or on Android? If it's Android, you might be able to load APKs off USB. I've loaded iVMS-4200 on my old Samsung TV (via a Chromecast equivalent) with the File Commander app.

Please provide the lens mm on the fixed DS-2CD2185FWD-I cameras and the focal length of the DS-2CD2785FWD-IZS. It would also help if you attached an screen capture of one of the DS-2CD2185FWD-I cameras and the DS-2CD2785FWD-IZS.

To enable the start record/stop recording automation with a single press, you need to create an action on the successful completion of the requests. Press and hold the Start Recording All Cameras shortcut and select edit from the menu. Scroll down to Success Actions and press ADD ACTION Select...

I can't say. Hopefully someone else will be able to test it. Nothing is mentioned in the release notes.

The next step is to create the shortcuts to stop the recordings. Duplicate the Camera 3 (automatic) shortcut. Press and hold the new shortcut and select Edit. Amend the settings to reflect the following (make sure to change my IP to yours). All the other settings are the same. Save the...

If you haven’t already, setup the shortcuts for the other cameras. Duplicate the Start Recording on Camera 1 shortcut by pressing and holding it the until a menu appears: Select Duplicate. A duplicate shortcut will appear marked as (copy). Press and hold the new shortcut until the menu appears...

Hi Armano - I've tried numerous times with the usual tools and methods without success. I was hoping Hikvision addressed the issue in the latest firmware released today (v5.6.1) alas not.

Great news. I'll post how to initiate and stop all the cameras recording in one step later today.

In Configuration>Image>OSD Settings change the Camera Name field and see if that helps.

Others have mentioned something similar. After upgrading to v4.xx (from a much earlier firmware) there may be a corruption of the admin account. The limited functionality is present in the local GUI but not the webGUI. A full factory reset after the upgrade was required to resolve the issue. I...

Ok, next step is testing on your side. Create a new shortcut. Select from scratch. Give your shortcut a name. Copy the rest of the settings as below and paste: 192.168.2.193/ISAPI/ContentMgmt/record/control/manual/start/track/101 into the URL field. The 101 at the end of the URL is the camera...

Stew is fine! ;) Back to the issue at hand. There isn't a way to send multiple requests with one shortcut. However I can create an action to initiate the other shortcuts provided the first is successful. It takes a fair bit of testing to make sure I don't break something. In testing a few...

Yes I think so. I'd need to get the scripting right and test. I'll update soonest.

Great. Please install HTTP Request Shortcuts onto the tablet. This app allows the tablet to submit HTTP requests to the NVR. Open the app and create a shortcut with the plus button. Select 'From scratch' when prompted. We need to test whether your NVR will accept the requests. Start with a...

The following would help: Can you navigate through the NVR settings to get its IP address? Is the NVR connected to the Church's WiFi router? How many cameras require this feature, their names and the channels they are on (channels are usually labeled D1, D2...) Do you have a laptop you can use...

The risk would lie in forgetting to return the NVR to its standard operating settings within the app. This could potentially leave the NVR continuously recording or failing to record at the scheduled times. In early testing I've had success controlling my NVR from an Android phone with the...

The Hikconnect has a remote configuration option for the NVR but I doubt it allows the functionality you require. Would you require all cameras to stop recording or selected ones? I'm puzzled why you would need this feature considering the risks. The short answer is probably yes, but it would...