Search results

So the firmware was updated by me around 3months back. The guy I had hired to do initial config spent 2 hours on it and wasn’t aware the firmware update for this particular NVR was on the Hik product page (neither was I until the supplier told me) and not on the portal. Upon him applying the one...

Hi Phil. Not sure why your reply has gone. I have the email notification. In short it’s meant to be one of the top spec NVRs, far beyond normal domestic spec. Hikvision - IDS-7716NXI-I4/16P/X 16ch Face Recognition 4K NVR with16 PoE

I am looking for someone who knows what they are doing at very technical level to sort my cctv. I’ve spent 1000s and still have problems. Several hour now spent this by someone else and still have issues. I’ve got a 16chan IDS NVR running on a dedicated ee 4G network, 5 x 4K cams, 1 ANPR and...

Hi Kyle, thanks the reply, funny enough that’s exactly what I tried. 10-15mins later it had come to life. Not before I’d made a phone call to Hik to express my dissatisfaction at how difficult it has been to migrate from one system to another.

Updated the firmware on the NVR and by upping the power budget I’ve got all the cams online. However the NVR is not adding to Hik-Connect due to the device showing as being offline. I am truly at my whits end with this rubbish, even after following advice and getting in pro I’m still...

That’s what mine looks like

Hi Steve, is that a 7 line ANPR your mounting, but haven’t got the original back plate. So you’re using one from a turret cam? I fitted an ANPR at mine didn’t order the SUS pole mount, and quickly worked out it was for turret cams. The one I order first was DS-1275ZJ. You may find that fits the...

To further update I’ve now discovered notifications have stopped worked on the cams which got put back on the old NVR. So all I’ve done is ploughed £1500 in screwing up my already functioning system. What an epic night!

So we have an update and in typical Hik fashion, there is a kin problem. Had a specialist booked in for 2hrs, and didn’t power the NVR until he was online. Upon getting it online it will only pick up 3 of the cams. Tried various ports and moved this about and still the same. How is it possible...

Quick update on this. So after much deliberation and many conversations I decided to bite the bullet and go for the IDS7716 NXI 16P. I Spoke once again to my config guy and he reiterated in my use case I do need the additional kick of the IDS. This time around he is doing the set up from the...

It’s not having a good image I am that bothered by, the ANPR when played back gives a perfectly good enough video. What I in effect want is a simple trigger to let me know somethings been by, the Acusense cameras just miss anything above 20mph when fully dark. Therefore if I want to find a...

Thanks for getting back to me. I have looked through a range of these and the specs seem a little ambiguous in regards to the ability to detect specifically fast moving objects such as cars/quad bikes at night. Obviously a single sensor such as a PIR would be preferred. However I would be very...

Hi all, me again! I’ve been slowly adding cameras to my home system, and seem to have outgrown the NVR. Currently it is running x3 4K colourvus, x2 4K darkfighters, 7 line ANPR and 4MP S6 speed dome. All the 4K cams are doing audio recording, with one of each running 2 way audio/live guard...

Hi all, I would like to fit some kind of beam sensor, which I can use to trigger a camera to make either take a video or photo. I am able to affix a reflector on post opposite my gate, and can get direct line of sight to that from my garage. I can easily pull another cable in from the NVR to...

Lovely thanks chaps. No plans to run any more PTZs.I’ve only got one more port on the NVR, but want 2 more fixed cams :-s

Thanks for getting back to me Phil. It’s a DS-2DE4A425IW-DE(S6), got it up yesterday and it seems all good just running off the NVR. I thought I might need to bump the POE setting up to long distance, but didn’t even need to do that. Long term, would an injector be a good idea?

Hi all, I have bought a new PTZ to run on my home system. The NVR is a POE 7608 i series. Roughly a year old. It’s running X3 4K colourvu’s, X2 4K darkfighter (all turrets) and a 2mp 7 line ANPR. I completely overlooked buying a POE injector, and intend to order one Monday. However today...

I am hoping the Ajax integration should be easy, everything about the Ajax so far has been brilliant to use.

So another update and one which is slightly more positive than others previously. Had another session today with the IP guy and he seems to have found and fixed the problems. Turns out all the cameras were feeding in to one channel (D1). He assigned each its own within the linkage action page...

I ran a test on the laptop similar that I’d done on the phone and it was better. Seems like I’m either the most unlucky person in the world, or tech is just cack. But now I can’t even web browse in to my NVR now, can get the login page. Enter details and get Network Abnormal. Was attempted to...