Search results

Does your app/software ‘see’ the DVR on the network? David

Do you have the admin username and password to make changes?

@Magz 7600 series NVR disk install on YouTube David

It worked for me. Only the scenes available could be changed. Camera DS-2CD2347G2-LU FW V5.5.801 build 211105 David

I suspect the trolls are bored.

Not sure why, here are a few suggestions..... Using the device you use for remote access.... On your local network test HD and SD playback, both should be error free. If you see playback problems, move closer, not too close, to your wifi router. If you still have problems try another device...

There are many factors affecting remote access to home networks. If DVR local operation is ok, the DVR is ok. David

SADP will also report the MAC address associated with x.x.x.103, does your kv6113 have the same MAC address? I would forget about wifi connectivity for now focus on the ethernet connection until you sort out the IP address. Does the kv6113 wifi interface have a different MAC address? Why do...

Has the web page GUI port changed? The default for HTTP is port 80. David

@zdenek Could your remote access password be compromised? From your image are those the total internet usage figures? Can you break it down to the inbound and outbound data figures? David

@Holmatt55, following on from my earlier post... Download the hikvision (Canada) sadp tool here and install it. When you run sadp your computer must be on the same network as your cameras. Post a screenshot of the result, make sure the serial number column is minimised. David

Hello Matt, Could you post some model numbers so we know what you are talking about? When you upgraded your internet did you get a new router? It is possible that your network IP addresses have changed. David

@gserbele there’s a mix up of subnets, let me draw a diagram so I can understand it better. Where are you?

Just seen this, I’ll have to read it a few times. David

https://www.spycameracctv.com/

I get similar notifications, on checking I’m up to date. Probably a bug.

I have the same NVR and firmware release of 4.61.025. Leave it as it is, you have the latest firmware that I can tell. David

Can you ping any of the ubiquiti bridges? Could you post a network diagram to understand what is where include model numbers.

I am not familiar with Hikvision access control, what model numbers are the indoor and outdoor units?

I can't see why not, how will the wifi network work to give IP addresses to the clients? Model numbers would help and a network sketch. Part of my IPCCTV setup will work router free even after a mains fail and power up. Those devices use static IP addresses. David