Search results

That must only apply to those with intercoms connected - I did away with mine some time ago. Have you checked that Me > Settings > Display Feature Information is turned off?

Yeah but we English are a little more refined lol

Hmm - the delayed notifications might be my dodgy new V Pro NVR then! I can't actually be sure when the delays started; I've had the alarms disarmed for a few days as I had a lot of work going on around the house. I'm getting the delays even when I'm on WiFi - I come home trip the line...

I updated Hik-Connect the other day from 6.9.880 to 6.10.0. It seems a step backwards as things have been moved around and changed. 6.9.880 - Clicking 'Me' you could log out/log in, see the version etc. 6.10.0 there's no version and no log out. To find the version, from 'Me' you have to go...

Several annoyances in the latest version of Hik-Connect released a couple of days ago: AcuSeek/AcuSearch were available directly by touching the active camera during playback. You could use AcuSeek on local only devices without being logged into Hik-Connect. Those icons have now been moved in...

Interesting that your firmware file was only 1.9GB. 5.05.351_250705 is 4.58GB on the DS-7608NXI-I2/16P/VPro. I'd have thought that the 8 and 16 channel versions of the same model would use an identical file. Unless your 1.9GB file was compressed (MacOS decompresses the file to 'digicap.dav'...

I've still not tried the 8MP version. The two models use different firmwares; H13 U for the 4MP and H13 I for the 8MP version. The 4MP was delivered with 5.8.10_241205 and has since been updated through three different build versions of 5.8.13. The 8MP is still on 5.8.10 albeit a newer build...

Yeah I would monitor that thread for updates. I'm no longer using my M recorder so it's on the previous version.

@flycop2000 - check this thread: https://www.use-ip.co.uk/forum/threads/m-series-nvr-firmware-v5-04-070-release-250828.12733/#post-58469 @johnfitzy and others are having the same issue with the latest version of NVR firmware that you’re using.

Do you get an error when you try and display the cameras in Edge browser? Maybe try turning off Stream Encryption if you haven't already then clear your browser history and try again.

You must be tying it incorrectly. The encryption key is viewable if you go to System Settings > Network > Hik-Connect. On the third image on the screen beneath the QR code you'll see 'Verification Code'. Click the eyeball to view it and then you can type that into your app. On that same page...

It should work if set to CVBS (Composite Video Baseband Signal) and connected to the TVs composite input (usually a yellow RCA connector). You'll need a BNC female to male phono adaptor.

I took a quick look at the earliest recordings available. It's difficult to say, but it's happened around about the time of one complete write to the two disks; that's to say from the existing disks being powered on and starting to overwrite disk 1, to fully overwriting disk 2 and going back to...

Had my first real issue yesterday with the new NVR yesterday. I noticed that all of my fire tablets that show a camera on their dashboard were failing to connect to the RTSP stream url. Later when I checked the local UI (HDMI out to TV) it was completely frozen. The cameras were all frozen at...

That would be the first thing I'd try. I have had a few go south over the years. Just find a power supply with similar spec on Amazon. If it's not the power supply at fault at least you can send it back without issue.

The video isn't playing for me but I'd guess that the power supply has failed. There could well be voltage there so the DVR starts to power up (you might see the LEDs blink), then the voltage drops out when the there's too much load for the faulty PSU to output so it powers down again. Rinse...

I missed this information posted from @trempa92 while away That makes sense. The Target Recognition module that can be enabled looks to be for facial recognition and I guess that might add the Face Picture Library into the menu as is present in the other NXI models. Regarding this comment...

No problem.

The cameras can handle light just fine but it's the glare that those lights are causing. Floodlights, lanterns, downlights or anything that's diffused will be fine. There's nothing you can set on the camera that'll deal well with that.

I've not noticed anything yet in my setup. No difference in remote playback. I installed it the day before I went on holiday and only got back today so I've had no time with it really.