Search results

Just a FYI..... if you have Panoramic cameras. Updated firmware available from the usual Product pages. And to my surprise, HIK included Release Notes this time. 2 pages. Here's a link to the PDF -> v5.7.20 Release Notes

For some added completeness , here's the Email config page from NVR Firmware Version V5.04.020 build 241106

Not sure if I understand your issue. Are you having problems using Gmail's SMTP service ? It does work, you just need the 2 Step Verification activated on your Gmail account. It goes something like this: login into your Gmail Account (this is the account were your NVR sends e-mails & then...

FYI, I've been looking into this on the newly installed v5.04.020 firmware on my DS-7616NI-M2. I was able to duplicate something similar..... similar but not identical. I do NOT know if this issue existed at v5.03.xxx firmware..... I didn't test for it. Some observations, etc: are you on...

JB..... I'm thinking from your later post, you have this sorted...... so this is just an FYI for any new followers watching this thread. The process I followed: Late yesterday, I checked for v5.04.020 on the Product Pages of "DS-7616NI-M2" or "DS-7616NI-M2/16P" at these countries: Singapore...

Something new or another security vulnerability ?? Hopefully not the later. But I noticed my NVR @ v5.04.020 is now listening for a connection on 10 new ports: 6111, 6113, 10010 --> 10017 As best I can tell, these are undocumented for the NVR..... although it seems HikCentral might use these...

FYI.... this version, Firmware__V5.04.020_241106 is now generally available at all major portals (well at least the 4 portals that I checked) Also, FWIW, my Win laptop reports the "dav" file is identical, byte for byte, to the "dav" file that JB1970 made available earlier. Thx for that JB...

VLANs are great, but they do bring a new level of complexity that one has to deal with. I use them in my setup, but that's me. Just a couple of considerations should you want the extra security that VLANs offer: does your 24 port switch even support VLANs ? do you need/have a router that is...

For added verification, this is the actual ARP Table (partially redacted) from a G5 Camera on LAN 2: ========arp========== IP address.......HW type.....Flags.......HW address............Mask.....Device 10.10.10.254.....0x1.........0x2.........24:01:c7:22:3b:c6.....*........eth0...

HIK Developers..... heads up, if you're still following this forum: SADP v3.1.3.2 incorrectly reports an invalid MAC address on the 2nd Ethernet interface. For example, on a DS-7616-M2 @ v5.03.020..... SADP reports: on LAN 1, SADP reports MAC address --> xx:xx:xx:xx:5A:4A (this is correct)...

Best first steps ??? FWIW, in my world, the 1st step is to: understand your goals & budget come up with (aka create) a network design that supports those goals / budget, & document your network To some degree, the equipment you have might dictate your goals, & thus the network design.... or...

FWIW, back in June 2024, I complained about the Playback "Event Markers" being off by an hour. Now that I am off Daylight Savings Time & back on Standard Time, the new Event Markers are no longer off by that 1 hour (aka DST Bias). Just a heads up to HIK Development..... you still need to fix...

From where I sit, it's more an "informational" message vs error message. AFAIK, the HIK webUI developers are just blindly putting a static message on the screen. My DS-7616NI-M2 @ V5.03.020 build 240904 has the same screen. My disk drives are fine. No doubt yours are too. Carry on.

FYI.... I noticed that HIK has provided (finally!!) some release notes for Firmware_V5.03.020_240904 Here's a link to their Global page: https://assets.hikvision.com/prd/public/all/files/202410/releasenote%5CK21B1_V5.03.020_build240904_ReleaseNotes.pdf

Understood. From the earlier posts, it sounded like the SADP issue might ONLY be on the Wireless side of your network, and NOT on the wired side of your home network. Which prompted my suggestion. So much for my wild guess. :) A PC with the Wireshark tool, inserted into your network, might...

Just a wild guess, that might apply..... SADP uses Multicast packets many home routers, like Linksys, by default, block Multicast packets on the Wireless side of your home network this "might" apply in your case (or not)...... so look for a Filter or Block Multicast setting in your router's...

Updated Panoramic Firmware DS-2CD2387G2P-LSU/SL - V5.7.11 build 240903 now on the street FYI, I noticed this update today V5.7.11 build 240319 was the previous release in typical HIK fashion, they kept the version @ v5.7.11. WHY is unknown to me. and, as usual, there are NO release notes (yet)...

Just a wild guess...... what are the chances your USB stick is formatted as NTFS or exFat ? If so, you might have better luck re-formatting it to FAT16 (or FAT32).

If you're paying attention, the video has 2 isolated networks..... Network A and Network B. And then you see the guy move the 1 camera from Network B to Network A. (there is NO inter-connection between Network A and Network B). That NVR has 2 NICs (just like your new NVR)... 1 NIC on Network...

Virtual Host, enabled on the NVR, provides a "relay" for your Browser from Network A to Network B and back..... in order to give one direct access to the camera(s). This permits such things as camera configuration changes without physically being on Network B. If the NVR is at 192.168.2.100 on...