Search results

I have a feeling your unit is too old to be compatible with the TandemVu cameras. I'm surprised the unit has firmware dated 2018 because as far back as I remember, units around that time only had bog standard motion detection without the fancy AI features. The Hikvision EU portal lists firmware...

Tap the ... next to the device and go into settings, camera management, select the camera and change the channel name

Me neither I noticed today when trying 2-way and Hik-Connect continually throws up errors See below the default codec for liveguard cameras where 2-way works fine

A word of warning, this codec will stop you from using 2-way audio if you have liveguard cameras

OP lost the silicon lottery and has a G3 Hilook ColorVu camera which was based on older silicon and no longer gets updates. There is a thread about it here. This forum has a perplexing fixation on firmware updates which mostly lack fixes for active issues or vulnerabilities. People need to...

Not worked much with analogue hybrid Hikvision cameras but I'm pretty sure the 'hyrbid' light side of the camera will only work with their newer 'AI' DVRs which support motion detection 2.0 human/vehicle analysis. The DVR needs to detect a human/vehicle and sends a signal to the camera to flick...

This is a common problem with these DVRs. I would do the following in order; #1 Disconnect all BNC cameras and try powering on the recorder #2 Disconnect the SATA & power cables from the motherboard. If the recorder boots, your HDD is fried and needs replacing #2 Try another PSU. These older...

I would get rid of the new DVR if I were you - return it back if you're still within the return period or flog it online. It only supports up to 4MP lite as opposed to 8MP with your old DVR. There is no real way to get your POC cameras working with a non-POC DVR without going through effort...

Your problem is the iDS-7208HQHI-K1/4S(C) doesn't support POC like your old DVR did. You will need the iDS-7204HUHI-M1/P

Seems a very odd choice to invest in their equipment when you don't trust the software that interfaces with said hardware. What makes you think they haven't hidden anything in the software baked into their hardware? You are welcome to contact their tech support, they'll tell you the same.

Hikvision 'ringfence' liveguard functions of their cameras behind their cloud service. You won't be able to start 2-way audio connected via direct IP unfortunately

How are you connecting to the cameras to start 2-way audio? I've found that direct connecting does not support 2-way and you have to connect via the Hik-Connect service in order to initiate it. Newer firmware for this camera has the static white light on event (normally on) which does the same...

I doubt clips are sent to the cloud when you don't have the cloud subscription. If that were the case, why don't they load when you pull the network plug on your DVR/NVR and knock it offline? In addition to notifications, Hikvision have ringfenced 2-way audio and triggering liveguard functions...

Has anyone else given this a whirl? Have you noticed any other differences since updating @dazulrich

I successfully did this with a DVR running 3.x firmware and assumed it worked on NVRs too. I had an old K series NVR running on 3.x firmware but stupidly updated the firmware prior to defaulting the unit and it would not unlink through SADP/NVR GUI unbind button. I contacted Hik who advised...

The only reliable way is by factory defaulting the recorder which will unlink iirc. Whatever you do, don't update the firmware prior to doing this otherwise the only way is to unlink it will be via the original hik-connect account it was added to.

There is a updated version of firmware 5.7.13 with build number 230504. Updated my cameras without anything obvious to note. Update notes: Repair the problem of the previous version: the speaker over power damage of /SL model. Fix the smart supplement light issue of V5.7.13. Problem...

The LSU/SL liveguard model can also do the static white light on event (normally on) or flash with different are varying speeds

Hikvision need to keep up, Dahua have had dual illumination cameras available for over a year and a half!

@Black Diesel Hikvision removed the ability to trigger the white light on motion in the G2 colorvu models and only support this on the liveguard models (LSU/SL) with the latest firmware. Customised firmware 5.7.2_211228 was the last revision that supported this on G2 colorvus. Not sure if the...