Ah ok thanks. If i just run the switch at a safe mid point under 60m with a cat 6 link straight to NVR poe port this will work then?
also i can't just access the smart feature from a pc and turn it on?
Hi Dan, i am using 4 x 4mp colourvu G2 cameras on these runs. i do have some 8mp bullets but they are about 10m max from the NVR.
i should add that there is no network there it's just an NVR with no broadband as it's in a locked cupboard in a flats ground floor area.
if this is an issue would...
I have been doing only domestic CCTV installs but have got a job installing 12 cams round a small block of flats. Some of the Cat 6 runs may be over 90m +. I had planned to install the above Hik switch at a suitable midway point but it claims to be able to support up to 300m.
Can anyone...
Got a client who has been running for 2 years with Hikvision NVR and Cameras. firmware has been kept up to date and also during this issue i updated him to rule it out. Also updated HikConnect app. He gets events of line triggers on his Hik Connect notification area. For some time it's been...
from HikVision
"Yes, the Acusense should help reduce the false alarms but this does require the setup to be done correctly.
You need to set a min and max size or at least a min size to help filter out animals for fewer false alarms.
For the min size, use a person for reference at the furthest...
this worked for triggering but flagged every time the cats crossed it. did you see it working for non human triggers?
i went back today and defaulted the cameras and added line cross and the validity setting there to highest. i'll report back what happens. it's a good test here as they have 2...
Another quick update chaps - spoke to Hik phone support today and they say the opposite to you. The i series has some deep learning capabilities but if you set up the line crossing on the cameras and not the NVR it does get passed back to the recorder. Also there is no 4 port i series so anyone...
just an update i spoke to my supplier and he said as far as he knew they were and there was no limitations of accusense. i showed him the validity settings and he had no idea this was the case so Hik like you say haven't done a good job here. i am still waiting for an official answer from them i...
ah well live and learn! unfortunately he's the first person i've set up cctv with accusense that has pets so i've just assumed it's all working.
i'll have to swap it out and use his one next job.
thanks for your help really appreciate it.
Thanks for replying. Can i ask where you are seeing this setting? i don't recall ever seeing that. It's not on the web browser log in. sure i haven't seen it on the NVR either. is it on the camera web page login?
i have setup some Hik G2 Colourvu Cameras and firmware updated them to the latest version. I have set up line crossing and it works but it is flagging the clients cats every time they cross the line. I have it set to human. The whole point of Accusense is to eradicate false alarms from non...