Search results

Hi Guys sorry for the late reply but Phil is spot on I had to remove my PSU and return it back to the company who sold me the system and they sent it back to Hikvision who sent me a replacement . If your google the psu you can find the makers in asia but non want to sell you just one . The PSU...

Oh understood you spiced a power line into the cat cable my loft is not very high so it might be more straight forward just to add a POE Injector .

Many Thanks Phil for the info I will give it a go but it seems to be ok at the moment with no flags . Why I am speaking to you can I use a Hikvision PTZ camera like a DS-2DF82231-AEL with my HIKVision DS-7608NI-E2/8P/A 8 .

Ok good news cameras all working on night vision just check tomorrow that there all off in day light mode but its set at 2 I did try 3 but it wont switch to night mode .

Hi Phil / Mick Well the good news I got the Auto to work by lowering the lighting setting to 2 and that seems to switch over ok . Now the bad new how do I get back into normal mode as it seems stuck on camera 2 the camera that I have been changing . Trying to get back into the main page were...

Ok guys I set the sensitivity at 7 and it still will not switching into night mode the only way I can get night mode to work is to switch to scheduled-switch night vision on at 7pm and off at 06.00 It would seem I have open a can of worms here as all I can only see on Live view is just channel...

Ok I am now into the Day / Night camera settings , What do I adjust so that the camera comes on just as its getting dark and not when its zero light . Once the setting has been done do I need to click off Virtual Host ?

Thanks Phil I give it a go and see if I can navigate to the Virual host setting as once connected to the camera it looks straight forward .

Not sure if I can log straight into the camera as I go via the NVR , I take it you are not using a hikvision NVR ? But have gone all over the camera settings via the NVR and cant find them I did email Hikvision asking them so there must be a way to adjust the light level via the NVR . Ok how...

Many Thanks for your reply I will check the camera settings and let you know , I will take a screen grab and show you but it looks the same as yours but I see you have got a day and night switch so me thinks this is how you adjusted the light level sensor .Many thanks for your feed back . Cheers

Thanks Phil yes I sent the old PSU back yesterday but it may be faster just going out and buying a replacement yes its still under warranty but it could be weeks before a replacement comes so without CCTV cover at the moment .

My power suppy for my Hikvision DS-7608NI-E2/8P/A went down last night I have checked both rails and there dead so it looks like I need a replacement or get the old one repaired .The old PSU is a delta electronics DPS-200PB-185A so far I can only find these in the states but there must be...

Hi Phil I can now see what you mean as far as upgrades go it would seem the only way to upgrade is by going to the Hikvision site down loading suitable firmware to a USB stick then plugging the stick into the NVR and doing a manual upgrade . I only hope that by installing this new firmware that...

This is sounding a bit strange but the NVR is connected 24/7 to there site for my remote viewing . I have a new DS-2CD2742FED-1 arriving tomorrow if that is the same as the other cameras that have been returned I will look more at the NVR firmware installed on the NVR but you can see what...

Fake

Hi Phil thanks for the information I have attached 2 screen grabs showing the NVR firm ware is up to date . I am about to buy a third camera and will see if thats the same as the others that were returned .If it is I will try and connect via Lan but the seller told me he got it to work via the...

Hi Phil yes your thinking the same as me but I did check the firmware on the NVR and it said it was up to date as for all the other working cameras i have attached a screen grab and there all working fine . My NVR is connected 24/7 to the Hikvision web site but this has happen twice the year in...

For over 3 months I have been looking on Ebay for Genuine Hikvision DS-2CD2742FWD-I so far I have bought 2 however both of them had to be returned due to not working . My system is about 18 months old and have 3 x DS-2CD2742FWD-I and 3 x DS-2CD2T42-I5 and 1 x DS-2CD2642FWD-I or the past 18...

Yes very much for your feed back and regarding the smart TV not being suitable to view the Hikvision output as for the password yes you cannot sign in which is a bit strange . But like you say even if we could sign in the web components plug in would not work . Speaking about Web Components...

I was wondering if it was possible to log into my DS-7608NI-E2 NVR via my Smart TV Samsung UA46ES6600 . As far as I know the Samsung smart tv is using Safari on Linux platform I dont know if this would be compatible to sign into the Hikvision web site I have tried a few times and it just comes...