Search results

Well I thought it had stopped because every thing has been working fine but in the past week its started all over again , In the past when this has happen I have found that by doing a firmware upgrade it seems to stop but I have upgraded the firmware on my Cameras are DS-2CD2742FWD-I However it...

Many Thanks Dan for the link but listening to many of the Shop Watch + Hospital channels who use Hikvision cameras in my area it would seem they also are having to reboot there systems since all there cameras were all going off and they would have to reset there systems all very strange ...

Many Thanks Dan I will give it a go , If its not compatible is the V3.4.103, Build 181226 still available to down load , Sorry Dan but that link you gave me :- geregistreerd via Argeweb goes to some dutch web page I dont think its Hikvision . Many Thanks Brian

Hi Dan just finished updated the camera firmware on my DS-2CD2742FWD-I dome cameras and was wonder if they had updated the NVR firmware as at the moment its V3.4.103, Build 181226 DS-7608NI-E2/8P/A 8 Channel IP NVR . Many Thanks Brian

Many Thanks Dan , I did look on there web site but most of the URLs for firmware updates seem to no longer work .But I will down load V5.5.82 Build 190909 . Many Thanks .

Does any one know if Hikvision have updated there camera firmware for the old DS-2CD2742FWD Dome camera .The last firmware I installed was V5.5.82 build 190220 has this firmware been updated or does it remain the same . I fully understand that due to the cameras age Hikvision no longer support...

Hi Fullboogie Well 3 years ago I retired from operating Rovs for over 45 years and use to fault finding but when the fault goes away when you remove the link to the router I would say its coming from the internet . But no other person has reported the same problem so it could just be me .In the...

Number 7 Camera still working keep watching for update .

Having worked in china for many years nothing surprises me . I fully understand regarding settings if the system was a new install then you may be right but like I said this is a 6 year old install over the years I think I have reset the password about 6 times . I was reporting it on this forum...

Sorry but I can only speak how I find as for the camera settings I am using all default setting on all cameras I fully understand regarding bandwidth problems due to over driving but this is not the case as I would have had problems years ago . The reason I say this is the camera goes off at...

Many thanks for your feed back and I fully understand what your saying but I am getting the same problem on the other 2 spare cameras they all cant have the same problem . All ok on being old cameras well all the others are working fine its just with port 7 however should I swap ports the...

Sorry i dont know how to I can do some screen grabs for you . But today I contacted support.uk@hikvision.com but this is not your standard type of problem . As if you go through step by step it all leads back to being connect back to the internet and nothing wrong with the system because if the...

Yes all cameras are at the same time and date .

Hi thanks for the reply yes even if I change port and even if I change camera , In the past 24 hours it has gone off again . Because this problem is a intermittent . But seems to happen when the internet in connected . I have spare cameras but the same thing happens to them . I dont have a...

I fully understand what you are telling me but there is no problem with the cables , Ports or IP confilcts . The system was installed in 2014 so its 6 years old . The NVR is DS-7608NI-E2/8P/A Cameras are DS-2CD2742FWD-I Only 7 slots are used This is not the first time this has happen from...

Well someone is turning it off ! Hikvision is the only one that knows my password , As it has been changed many times , The same camera gets turned off even if I change over the camera . So I can only speak how I find in the past when they have changed camera or NVR firmware if you dont update...

I wonder if I am alone with this problem or if others are have the same problem , From past experience when they do a firmware update and you dont update they turn off my number 7 camera and you need to restart your system again .However when you have updated your Camera and NVR firmware all is...

Hi Dan Many thanks for the reply the NVR is a DS-7608NI-E2/8P/A and thanks for letting me know about the reset I will give that a go then should be able to get into the camera and install the new firmware IPC_R6_EN_STD_5.5.53_180730.zip . Many Thanks

Over the past 6 months the system over here has been very intermittent which at the time I thought was down to faulty cameras since the cameras were out of warranty I bought new ones the problem of the cameras just turning them self off did go away for a few days only to return . From asking...

Yes I fully agree looking at the manual it states 4TB but like you say it works fine on 6TB its just that I was thinking of upgrading my HD and was told the max was 4TB but in the end I installed a 6TB Purple and like you say it works fine . Thanks again Phil the new replacement 2742 that I got...