Search results

Nothing is showing so I will need to add the NVR not sure how it’s been “lost” but there you go. Thanks for the info

Thanks for the reply alfaclvi it’s now showing that the NVR is online so one step closer but still unable to log on remotely via the app using data.

The NVR has the same ip as this is reserved so no problems there. Main problem now is that the NVR isn’t connect to HIk Vision server (saying offline) for the use of their app. I can use the app to connect to the NVR whilst it’s using the same network but as soon as I try to log in using mobile...

I have had the router replaced but I can’t remember if this was before or after I had problems

Yea and no I can view the cameras at home but I am now unable to log on via the app if I’m not not at home. When I go through the settings it’s saying that the HIK Connect if offline so I expect that the NVR isn’t connecting to HIk visions server. I have tried everything on this but can’t get it...

Ok so a bit of an update. I used the SADP tool to find the IP address of one camera then added it manually on the NVR and I got it working. Done it for the other 3 cameras and all good :) So then, in my wisdom, I upgraded the NVR firmware to 5.02 and it looked very slick, but I lost my...

I had my cameras disconnected whilst I was having some work done. Over the weekend I reconnected them and all good. When looked at one of the cameras the picture wasn’t as sharp as the others through the app so I waited till I came home and looked from the NVR and was still the same ( no...

Had my system for a few years now and just leave it running with the odd FW update. Last week logged on but said no cameras online. Went to the NVR and all the light on the network ports were off. Logged in and the NVR was running fine apart from was saying the four cameras were offline...

So again two failed ( same ones) rebooted NVR yesterday at 1pm one lasted till 5 am this morning and the other only lasted till 9pm the same day

Swapped over the cameras to different channels (but still only using channels 1 - 4) lost the drive camera at 9pm last night but can see it on a live view through the app on the phone. Went via the webpage and hasn't recorded but when I try to live view it won't show anything on the Main Stream...

Yes all fed from the NVR via POE Looking through the recordings all 4 channels have some lose of picture / recording, But 2 of the channels seem a lot worse than the other two so will swap them over and see what happens

All the cameras are set to record 24/7 currently running 2 x 3Tb Purple WD HDD's Cable's were factory made ds-2cd2385fwd and the 2385-G1 loose the picture They seem to go offline as unable to view live or recording. Thinking of swapping the channels to see if the fault moves to the other two...

Just upgraded the NVR to the newest version (V4.50.000 build 210125)

all the cameras are running V5.6.5 build 200316 NVR running V4.40.017 build 201124

I have a 7608Ni-I2 NVR and connected to that 4 cameras 2 x ds-2cd2385FWD 1 x ds-2cd2355fwd and recently a 2385-G1 a couple of days ago looking back remotely to view my cameras but couldn't view some of the cameras, I was thinking it was due to me moving around and the mobile signal being not...

Thanks for the quick reply!! the only problem is they won’t have a pc to access as we would directly access through the NVR and a monitor at each site.

I have got the ok for us to upgrade our cctv in our school now the “lower school“ has some really old cctv so will be a complete new install so thinking 32ch NVR with ip cameras. Now the upper school is slightly different where it has an DVR but does have some Ip cameras connected to it via a...

Thanks for the reply I did look at the G2 but at the time only had 4MP. I have reduced the sensitivity down from 50 to 40 and has reduced a lot, but didn’t know about the min and max size objects. I think on the motion detection that’s what was seen on the roof of the car. I will have another...

Hi, Last weekend i changed my DS-2CD2385FWD to the updated DS-2CD2385G1-I due to wanting a wider FOV as wasn't covering all my drive. Then this week as I walked out my door I found my car door not closed fully, on further looking I found that someone had had a look through the centre console...

I went to update mine today from 5.5.4 171206 to the latest but keeps failing on 2 of the 3 cameras