how-to
-
How-to: How to add a Hikvision NVR to Hik-Connect
Before you start… Make sure that the network your NVR is connected to has an internet connection. Check that you have set the gateway address on your NVR correctly in Configuration > Network Configuration > Network Parameter > TCP/IP page, which is usually your router’s IP address. On the...- Kyle
- Thread
- add app enable hik-connect how-to mobile nvr register
- Replies: 0
- Forum: Guides for NVRs with V5 firmware
-
How-to: How to connect an IP camera to a Hikvision NVR
Adding cameras to your Network Video Recorder (NVR) is a crucial step in any CCTV setup. Not only does it allow you to store and access all your camera recordings in one place, but it also simplifies camera configuration. In this simple step-by-step guide, we’ll show you how to add cameras to a...- Kyle
- Thread
- add camera device dvr hikvision how-to m-series nvr nvr 5.0 plug and play
- Replies: 12
- Forum: Guides for NVRs with V5 firmware
-
How-to: How to set up Hikvision's Smart Hybrid Light cameras
Hikvision’s Smart Hybrid Light cameras offer a versatile solution for those who are unsure whether a black and white IR picture or ColorVu mode is best suited for a particular scene. These cameras feature both IR and white LEDs that can be used independently, allowing you to customise your... -
How-to: Can I connect more than one camera via a POE switch to a single POE port on my Hikvision NVR?
In some scenarios, it can be useful to have several cameras connected to a POE switch but to keep that switch directly connected to your NVR rather than the local network. If you are able to connect each camera to its own POE port on your NVR, then this is generally advisable, as using a Plug &...