Recent content by Johnny08

It's all a learning curve, that's why I'm here as a novice to have a better understanding from the support of the experts on here. The door station had to be reconfigured since the firmware update, everything was lost on the monitor! The DHCP is now disabled, thank you for that point. The main...

Ipv4 address and port 8000

Just thought I'd share these 2 screenshot of the doorstation, maybe there's something else not quite right?? Thank you for your patience

It's like trying to get the lottery numbers right :) Still getting an error 10706. I've also tried port 554. If I could just get the combination of one camera right the rest will follow. Frustrating Thank you

In the camera management settings, all channels ports are set to '1'

Where in the NVR settings will I find the correct IP address and port? I've been using port 554.

Also, I'm not sure on the correct user name and password in the intercom settings when setting up the cameras....is it the same as the camera password or the nvr web portal password, theyre both different as set by my installer. Thank you

I'm not sure I follow. My understanding is that each camera I input as a new device in the intercom station has the same IP address as the nvr? But the only difference being the channel. Do I have to set up chanel numbers in the NVR settings to correspond? I think all channels in the NVR are set...

Amended all settings. A big thanks to you. I will keep an eye on the timeline glitches and event notifications randomly stopping. As I updated firmware for the NVR and cameras, I thought I would do the same for my doorbell camera and indoor intercom station. While the doorbell cam went without...

There are 3 colorvue cameras connected to 3 ports on the NVR and the doorbell camera is connected to the splitter as seen in the screenshot. The internet feed from the router is via a power socket adapter. Checking last night's timeline after upgrading firmware, event recording is triggering...

Thank you for your reply, I really appreciate your expertise and support. I've upgraded the NVR and just the one camera for now. I will amend the detection settings and report back. Going back to the camera not recording/rebooting, as you can see from the screenshot, there are 3 in succession. I...

Good afternoon, thank you for your reply and support. As requested.. NVR acusense DS 7604NXI K1 /4P F.ware v4.74.015 build 230331 Camera DS 2CD2387G2 LU V5.7.3 build 211222 The screenshots show configuration SMD event settings, enabled and linked. To try and resolve the issue of intermittent...

Hi, I am new here and pleased I found this forum, hopefully to solve my issue. I have been using hikvision colorvue cameras with nvr recording (firmware v4.74.0.15 build 230331). There's just one camera with an event recording issue. Although the camera records continually, it randomly stops...