Recent content by JulioFr1ch

yes indeed maybe via the rtsp stream but then I have to dissociate the camera from the nvr because if I add it via the nvr it doesn't work because it has the same IP address

Hello everyone, I recently acquired an axis P3713-PLE multi-sensor camera and I added it to my Hikvision NVR without problem using the AXIS protocol, but I would like to add the Quad view to the NVR because currently I do not see that only one stream out of the 4 that the camera has can you help me?

hey hello everyone, today I am attaching a video that shows my problem, I have a P1468-LE connected to a Hikvision NVR is it jumps frame rates you will see at 10:21:24 it freezes, note that the results are the same on my NAS Syngnology the frequencies also jump at times on the video, how to fix...

Hello everyone, I was able to recover an Axis camera, do you know if it is possible to connect it to a Hikvision NVR?

Hey, after being able to study the recordings better, guess what?, this actually happens on the 3 4K cameras but not on the others. I am waiting for the hard drive I ordered hoping that it will be better...

Hey, I changed this camera a while ago because I needed the Live-Guard function because I have some neighbors who are a little too curious. And I remember because it was a very short time ago that the front camera didn't have this problem. So I think there is a problem with this one, and I just...

I just tried your advice, I exported part of the recording where something is happening, and the stutter is still present, even in the exported file for playback on a PC via VLC. It's actually good to note that in live view on the main stream there is no stuttering. I will try to set the...

Thank you for your time :) I checked the bandwidth used by the cameras on the NVR, it is 37 Mbps. Indeed the bandwidth of the CH3 very often exceeds the limit of 8192. To answer your question, the problem does not occur in night mode. This therefore excludes a wiring problem, another point...

Hey, thank you for your reply ! 1.The NVR model is DS-7608NI-I2/8P and the firmware is V4.60.005 build 220108. 2. There are 8 cameras on the NVR (3 4K cameras, 5 2K cameras). 3. Affected camera: DS-2CD2686G2-IZSU/SL Affected camera firmware: V5.7.10 build 220830, it is connected to channel 3 of...

Hey friends, After making the necessary changes, the problem still persisted. I did a firmware update just now I will see in 24 hours if that improves the situation, otherwise I don't know what else to change...

thank you very much for this help, I will do what you told me and I will come back to you to tell you if it is better or not..

Hello, do you know how to fix this: when I watch recorded footage from the NVR on one of my cameras the playback is full of image jumps. For example, I go from 11:07:19 to 11:07:24, during a movement we therefore see the movement cut. Do you know what can cause this and how ? thanks in advance...

hello everyone, i am wondering i have an inverter with ethernet rj45 protection on which my nvr is connected with the power socket. Do you think that if I connect the rj45 cable to the inverter and then go back to the nvr the PoE will still be on? Currently this rj45 protection is not used...

Hi @Dan Here is part of the video that shows my problem, here it is the export from the NVR you see the image is pixelated and it is unusable, in local replay on the NVR it does not produce quite the same thing, the image jumps directly, it must be repaired but how? Do you have an idea? Here are...

Thank you very much Dan, it seems that this firmware has reduced the grain effect although you can still see the pixels move slightly. Julio.