Recent content by nicobar

I see, is there a documentation somewhere? How would I setup Hik-Conmect for instance? Thanks

Wooow. That explains! Thank you for your precious answer.

I have it connected via ethernet. Pardon me, what is an ISAPI command ?

Very deceitful, "http 80" you would think is web, as any other Hikvision camera I ever came across. But why iVMS (latest version) does not show many of the usual settings? No checkbox for hikconnect, no space to insert the verification code, and in fact Hikcomnext does not work, it says wrong...

Jesus but how can it be? 1) specs in the datasheet clearly state http port 80 ! And iVMS does not show HikConnect and many other settings, and SADP, although it has the checkmark, says "settings saved, hik connect settings failed", and in fact it does not work! This is utter junk, I am shocked!

Hello, I am an amateur with a long list of Hikviison IP cameras installed successful throughout the years in my properties, more than 60 (the cameras, not the properties!). I always use cameras alone without NVR's, accessing the cameras via web, iVMS, or Hik-Connect. I went through he years...

I cannot access settings "in person" because I am not there, but I can access settings remotely via iVMS. So I just wonder where to go in the settings to achieve what was suggested in an earlier post

No, I use iVMS for configuration purposes only, it does not run normally. I just wonder if I can apply the suggested settings to the indoor station via iVMS as opposed to do it in person, which I can't

I have TeamViewer access to a local PC with iVMS. No NVR. 4 indoor stations (the master has fixed IP) and two outdoor stations. Everything works except I use to see mugshots of people ringing the doorbell, no more. I won't be able to access the property until late June, I'd love to be able to...

Hi, having the same very problem, only with KD8003IME1 (B) version (which has a web interface also). Everything works beside Hik-connect not showing anymore the pictures of those who ring. I have no access to the property these days because it's abroad, but I have iVMS local LAN access, can...

I tried that, but when linking devices from the device management page of the main outdoor station, there is only three options: - Indoor Station - Decoder Station - Sub Door Station None of the three works when the second outdoor station that I am trying to link is set in "Outer Door Station"...

Bumping this one, I can see that when I setup one unit as "main door station" and the other as "outer door station", they both keep the "Passwords" page therefore I Can setup separate pins for the two units (say one is gate to the property, one is the house; gardeners should access the property...

Anyone wondered what "outer door station" is?

Hello, Playing around with two modular intercoms DS-KD8003-IME1(B) , each with a DS-KD-KP keypad, and four DS-KH8350 indoor stations (one setup as master, three as extensions) What I am trying to do is: one door station outside the property gate, one door station at the house. Ringing from...

One more addition: playing back and forth with the settings, it turns out that the very setting that makes the "device management" and the "password settings" disappear in the second outdoor station is turning the station number from 0 to 1. When you put it back to 0 as the main unit, the pages...