Recent content by Paul Bradley

Hi, I have a 8ch annke nvr set up with 4 x 8mp annke cameras all came as a kit. I have the nvr set up on platform access and I have eternal internet access to the 4 cameras. However in the live feed it can be glitchy and show a blurred image/rainbow of colors to the the bottom right hand...

Hi @Dan Current firmware is V5.6.0 build 190320

I recently bought a used Hikvision PTZ, model number DS-2DF8236IX-AELW. I have factory reset the camera and have been able to connect it to my hik-connect account and access the web page and find it on the SADP tool. It displays picture and zooms okay. On start up a message appears on screen...

Hi @HarrisCy thank you for the reply. I am curious how has the NVR preformed since your update? Also have you got feature like Smart Events now since the update?

Okay thanks for your help.

Hi @Kyle I have tried a few different network cables. I have taken the camera down and have it on my desk with a short cable that was being used for another router with no issue. The RJ45 connection was sealed during use and visually looks like new with no signs of corrosion. The camera was...

Hi, I have a Hikvision DS-2DE4225IW-DE that was installed last year (1year and 1 month ago). On Saturday last it stopped working. It has a direct 12v supply which is providing the camera with power, when I remove the back plate to access the SD card area there is a small red LED flashing. I...

Hi @Kyle, Yes it would be the first time I updated the N46PCK NVR's firmware. I have contacted Annke support but they are little help just generic copy and paste replies. Would my current firmware be more recent than that on their website as its v3.4.97 build 181119? I have not took the...

Hi, I have a Annke N46PCK NVR, it is a Hikvision 16ch OEM NVR. I am looking to update the firmware and have contacted Annke support but they state the box is up to date, I don't believe so. I also have a Hikvision DS-7616NI-K2 / 16p its updated and running okay. The Annke NVR is very similar...

Try plugging in the Comfast CF-E130N into you laptop directly turning off your wifi and then open a web browser and search "192.168.10.1". If that doesn't work then change your laptops ip to 192.168.10.10 and try again. Video below will show you how to set the laptops ip. You will need to set it...

I believe you have to set your pc's ip address to 192.168.10.10 or similar as the Comfast CF-E130N usually come with a set ip address of 192.168.10.1. Your pc will not see the device if you do not configure your ip.

I have update my Annke cameras to Hik firmware aswell. Just wondering have you updated your NVR to Hik firmware?