Recent content by Rob887

Hello mate. Are you sure I need 5.6.10 To be fair all the ANPR is working fine on 5.6.11. not sure if 5.6.10 would be better ? Also I've worked out how to zoom in.. some reason using edge (as internet explorer. Probally wrong add-on installed my side) it didn't work but the zoom function...

I've tried that as that's the same way I do It on my PTZ doesn't seem to work on this camera.

Thank you for the reply. It's unplugged ATM but last firmware I downloaded was "IPCM_H3_EN_STD_5.6.11_230104.zip" so guessing that I've tried virtual host directly to the camera. Tried web host onto NVR Just not sure where I should be seeing the setting and also it's hard to find the manual...

Hello Hoping someone can help Just got the DS-2CD7A26G0/P-IZHSWG for ANPR I'm wondering two things. 1. How do you change the zoom as it says its (2.8-12mm) but can't find a setting to change it. 2. Also what the most up to date firmware. I always struggle finding them on the portal thank you...

Thank you iDS-7732NXI-M4/16P/X Looks so perfect. Need to see if i can stretch my budget !. With regards to DS-7732NXI-I4/16P/S i saw you said 'AcuSense Filtering' but does it still act like a normal smart event with alerts ETC. If I had 4 NVR Acusense for intrusion could i select different...

Hello people. I've got an DS-7732NI-I4 / 16P and it's been good for 5 years. Now looking at upgrading what does everyone recommend. ( don't even mind moving away from hikvision. But I do have doorbell,ptz and vehicle number plate camera ) I was thinking a Nvr with AcuSense ? As the only thing...

While I have you Do you have any idea what settings I could tweak to maybe catch these too plate . They have not been detected

Thank you for that.. yes I've been testing it lately and it's only missing the dirtiest of plates atm.. going play with some settings but I don't think that's too bad. What would be the most up-to-date anpr in this range ? As looks like both are not supported any more Thank you

Just tested again. Email i get to work. But still can get it on the app. This is an automatically generated e-mail from your NVR. EVENT TYPE: vehicle exception EVENT TIME: 2023-01-04,14:00:11 NVR NAME: Network Video Recorder NVR S/N: 162eeeVU CAMERA NAME(NUM): ANPR (D12)...

Thank you for that ANPR is set to Other. I've just tried it on Email to see if that works (camera web interface) But that wont even connect to the SMTP (same details as in the NVR) The NVR does not seem to pull the Vehicle Detections from the Camera to change the Vehicle detections settings on...

Hello Hoping someone can help me. i have a license plate hikvision camera with license plate firmware. it detects plates fine but for some reason will not notify the app. i have better luck doing the number plate settings on the virual host for the camera rather then in the nvr but ive tried...

All working. Thank you Can i connect it directly to the NVR and work the same ? Or shall i just manually enter the camera as an IP camera on the nvr from outside network

Thank you. About to put an order in. What would be one camera up from this ? (with same features) Thank you

Thank you, I'm pretty sure i did everything you said there last night. (but will try again) I had it in my hikconnect app after adding the serial number to my account. Do i set it up as a 'Doorbell' or a 'Villa Intercom'. Kind Regards

Hello Need a slight bit of help with this Got the Doorbell from your website and trying to get the call button to work. It doesn't seem to ring the hik-connect app ? kind regards