Recent content by Soren

all my gear bought from you JAN'16, so should be western region cams ;-) My cams is connected directly to the NVR where virtual host enabled, and the batch program unfortunately not able to locate the cams. My plan was to connect the cam directly to my pc then for update during the weekend...

english error code is: "Failed to get the upgrading progress"

Hi Phil. The fiour cams succeeded had same last version 5.4.4 as the version on the one not accepting the update. Its returning the error code "can not load upgrade process" (my translation from danish error code). Error occurs after loading 8% of the file. All my cams (DS-2CD2142FWD-I) is...

I just updated the firmware to v5.5.0 on 4 of my cams from v5.4.4, but the 5th cam (similar to the first four) telling it can not install the firmware. Tried now for 4 times and same happens. Anyone tried this?

You need to configure iWMS with the IP address pointing towards your router from 'outside', eg the ip address your router has been assigned from your ISP. You as well need to configure your router with port forwarding to your NVR. If you do not have a fix IP address then you should setup DDNS...

This tread for 2CD2x42FWD cams with latest firmware v5.4.5 Not fully get why making post to 2xx2fwd V5.4.41 which not newest firmware for cam's related to this forum (2cd2x42)......

Has updated as well and seems running fine

Anyone that have the release note for v 5.4.5 DOWNLOAD PORTAL ? The .zip file don't contain any information. Updated my cams - only visible change is that hikdns now unsupported and authentication/verification enabled for hik-connect.

New firmware released 13-Mar-2017. Anyone that have updated their firmware running this version (3.4.92)? Just have no issues with v .91 and looking back on previous updates not all has been stabil ;-) so curious whether someone has runned v .92 ? DOWNLOAD PORTAL

Above to close this thread (firmware 3.4.91 solves the high load issue where NVR reboots)

Defiantly- this firmware Optimize the NVR’s stability in high load situation and has solved the issue on abnormal restarts faced with v 3.4.90 (at least for the I-series which I have). Also few other improvements which can be seen in the release note

on day 12 without any abnormal reboots/shutdowns

Read this post: http://forum.use-ip.co.uk/threads/tutorial-megathread-getting-started-with-your-hikvision-system.689/#post-1359 My opinion: quit motion detection. Its not catching what you want when needed and catching items as the insects you are experiencing. Put the cams on continues...

Realease note: Optimization [Stability] Optimize 7608NI-I2/P NVR’s stability in high load situation. Link to Hik Europe download: http://www.hikvisioneurope.com/portal/index.php?dir=Product Firmware/Back-ends/Recorder/NVR/76 77 96 NI-I/V3.4.91 build161220/ NVR updated. Even have been running...

Most properly ;-) I can not see any real different from using 10 pictures per second compared to 18. Read somewhere that the human eye can not see any difference in the stream down to 7-8 pics per second. Of course, my surveillance is only for home use, and as such 10 pics per second should be...