Thanks for your advice once more JB.
I will need to change the password on 2 cams first as they dont match the NVR's password but also I will be changing cam settings after the upgrade as they are throttled back at the moment due to the K NVR struggling with decoding. Therefore can I use...
I decided to upgrade to an 8 channel M series..
I currently have a 7608 K2 using the latest version 3 software (not v4) with 7 cams of G0, G1 and G2(c) variants connected to POE ports on the NVR.
My question is.
What is the correct procedure to transfer these cams to the M series NVR...
I have still got my 7608 K2 on v3 firmware but am thinking it's about time to get v4. Also to look at upgrading a couple of cams so it's gonna be an M series NVR for me rather than just a firm upgrade on the K.
I may opt for the 16 channel as opposed to the 8 but my main concern is fan noise...
Thanks a lot JB. Your reply makes perfect sense. Does seem to be the case from reading the relevant threads on the forums that the users affected are not very clued up about their systems.
Thanks I've seen that. A user posted it on the forum in question. I was just wondering what this forum thought as Dan and the other chaps are pretty hot on these kind of things Would be interested for instance to know in what circumstances systems are vulnerable and whether it is relevant to...
I have seen a number of reports on a Facebook forum that users are being hacked. The hack results in a message appearing on all camera feeds. Photo of one such hack attached. I've not experienced this myself but wondered if it is known to this group.
Hello David
No I haven't really considered that but can see it might be an issue. I'll have a look at what power usage I've got at the moment.
I didn't purchase the switch, it was given to me so it's not a loss if it's not going to be any good.
Cheers
Hello Dan
I think you hit the nail on the head, I just didn't understand what connects to what and presumed it's the way I described it. know.
The reason for having the switch is the usual too many cables go into the nvr, making it a bit more tidy and allowing me to move the nvr around...
Hello David
5 of 4mp G0s, 1 6mp G1 and 1 of 8mp G2(c).
I realise the switch may struggle with the bandwidth with all cams working but I'll give it a go.
My lack of knowledge and understanding is with process and connections for setting this up rather than the settings (other than anything to...
Good Evening
I have a 7608p NVR and 7 poe cams.
Cams are currently connected directly to the NVR ports and the NVR is connected to my router. All works good HIK Connect, etc.
I'm looking to alter the connection so that cameras are connected into a POE switch, POE switch is connected to NVR...
Yes no problem Phil.
Remembering this is version 3 software and not version 4.
The setting to change both VGA and HDMI output resolution is found as an option in the General tab of the Configuration menu.
Click on the image below to see.
Edit.
Data Sheet says.
"HDMI Video output of up to 4k resolution".
So the question now is how do I change the settings on the NVR to achieve that as I cannot see the option. I am still operating version 3 firmware. It is the latest version.
Apologies for this very basic question.
Video output via HDMI of my K2 NVR is 1080P hence resolution of 1920 x 1080. It's connected to a 4K monitor, resolution of 3840 x 2160.
My cameras are set to record footage above 1080p resolution.
I'm presuming that due to the NVR's video output...