Search results

Hi there. I’ve no diagram. What I did was operate the unit with the normal power supply before removing it and measured the voltage on each pin with a multimeter. From memory, the +12 pins are all commoned up on the PCB so you should just need to connect one +12 and one 0 wire to the coaxial...

I might add. I snipped the end off this and soldered a coaxial power jack to that to match the plug on the Meanwell brick. You could just cut the meanwell connector off if you wanted to and splice the cables together.

Sure. The part I bought came from Kenable. Their part number 005393. Cheers Mike

So I can report - for anyone who might find this useful - that the connector is indeed very similar to a GPU PCIE connector and a suitable cable assembly can be purchased for a couple of pounds from Kenable or Amazon. I purchased a MeanWell GST60A12-P1J and the total power consumption is now...

Hi. I read another thread on reducing fan noise on DS-7608NI-I2/8P and wanted to share some findings concerning POWER reduction as well as noise. Since the NVR is on 24/7 this is important to me. In my installation, I do not use the PoE since cameras are on my main LAN and powered from a...

I recently acquired a DS-7608NI-I2/8P from eBay and it's working nicely. The fans are not too loud. However, I am keen to silence the box. I can confirm that it runs perfectly happily with the internal 52V disconnected from the board (I am not using the PoE).This also reduces the power taken...