bigmick777
Active Member
- Messages
- 49
- Points
- 8
Hi - I have a ds-2cd2387g2h-liu/sl (4.0mm) running v5.7.18 240826
Day/night is setup as follows
- day/night switch = Auto
- sensitivity = 4
- filtering time = 5
- smart supplement light = on
- supplement light mode = smart
- light brightness control = auto
With all the backlight settings OFF the picture is really dark (exposure is 1/25).
I thought with the light brightness control set to auto the sliders for the IR and Light were redundant, however, if I slide the IR slider to 0 the B&W picture gets brighter - once the slider goes past 10 it goes really dark again.
If I switch on WDR then I get the best IR picture but something doesn't seem right with the IR / settings at the moment - any comments as always greatly appreciated.
Day/night is setup as follows
- day/night switch = Auto
- sensitivity = 4
- filtering time = 5
- smart supplement light = on
- supplement light mode = smart
- light brightness control = auto
With all the backlight settings OFF the picture is really dark (exposure is 1/25).
I thought with the light brightness control set to auto the sliders for the IR and Light were redundant, however, if I slide the IR slider to 0 the B&W picture gets brighter - once the slider goes past 10 it goes really dark again.
If I switch on WDR then I get the best IR picture but something doesn't seem right with the IR / settings at the moment - any comments as always greatly appreciated.