Hello All,
One of my family members has just had a new NVR with 4 cameras set up, they can access the system via ESP view App on their phones.
I can see a username and password in the ESP view APP and this is the one the fitter has told me to use, but when I go to the ip address on my laptop...
Hi All
need some help with choosing the right hdmi transmitter/receiver, I have NVR in the loft with cat6 cable coming down to the living room, my previous hdmi sender/receiver went faulty so need to replace. The faulty one is 4k HD and I have seen 4k 60ghz, would this be ok to work on my tv...
Hi
I have just added a DS-2CD2347G2-LU camera to my cctv sytem, current cameras are DS-2CD2347G1-LU x 5.
The DS-2CD2347G1-LU all work fine and I have smart alerts setup (line crossing, motion detection, etc) which all send me notification to my Hikvision app on phone.
The new camera added...
Hi JB1970, when you say camera PSU you mean unplug the power cable from the camera ? If so I have removed the BNC connection for that camera from the DVR side (camera is mounted high up and would be a struggle to get up there) and it clears the text but after a short while it re-appears
Thanks All, firmware updated only to V4.21.000, tried the 4.25.001 kept failing so could not apply this.
I will try the camera menu fix as suggested to remove the text from one the camera, thanks JB1970
Thanks Dan, I will update the firmware on DVR soon, no idea of camera models as they are mounted out of range to check and I cannot see anywhere in the DVR of the models for these. I am hoping DVR firmware update will shed some light on camera models
Hi All
I want to add a outdoor PTZ hikvision camera and another fix dome inside the house, can anyone recommend any. Currently have 5 colouvu cameras (DS-2CD2347G1-LU)
Thank you
Hi All
A few things I am trying to sort out with the cameras that are connected to this DVR (its a close family, cctv setup done a long time ago)
Firstly there are no camera showing under the below, would this be a simple case of upgrading the firmware on the DVR (its currently on V 3.5.22)...
Hi Dan
Apologies for so many questions, this is all new to me. I work in IT but CCTV is not something I have dweleved into much.
If I connect a ip camera to my router using a Poe injector so it’s on the same ip range. Can I then add this camera to the dvr or Ivms ?
Hello All
Is there a list I can obtain as I am trying to figure out which camera would be compatible with this DVR, already have 3 cameras fitted and are using BNC connections (not POE).
Ideally want to put in a PTZ 5MP camera not fixed dome.
As always appreciate any help
Hi David
Found the issue in the end, the cat 6 cable coming from NVR NIC to router was faulty, the connector on the router end was not crimped correctly, this has now been replaced. I also had all cat 6 cables tested. Appreciate all the help :)