Many thanks for the reply.
I;m a windows user (although I have a mac that I struggle to get on with) I use FING as a network tool - but cant seem to locate what is causing the issue.
My Router is set to allocate DHCP outside a set range as you suggest...
Picture inserted / attached below
the Router logs have mutlitple entries for the time I get the Email from NVR.
I've removed the actual MAC addresses from the entries below...
08:49:10
24 Dec. 2.4G client Mac: [mac address] Deauthentications (Reason:Class 3 frame received from nonassociated station)
08:49:08
24 Dec. 2.4G...
Apologies that was an autocorrect - the DHCP range is set to be outside the range I;ve allocated as static IP's
So my range is 192.168.1.1 to 150 for static - then 192.168.1.150 onwards is the DHCP range on the router
Hi. Thanks for prompt response.
It’s a standard bt hub (2 I think)
I will check but I’m sure I’ve set the echo range to exclude the range I’ve allocated manually to cameras.
Is there a way to identify the conflicted ip address.
Hi. Relative newbue here.
I have a16ch Hik nvr with about 10 cameras connected via network (as in not connected directly to the nvr ports )
The Hik cameras have static ip assigned
And most of the time all works fine.
Randomly I then get an ip conflict error. I can’t work out what is...
Thanks for taking the time to reply.
Your solution has some merit, but I should have explained myself a bit more detail.
I want to work out the correct focal range, so that I can then purchase the correct focal lens (4mm 6mm 12mm) camera.
if anyone knows how to tell the lens on the varifocal...
Hi,
I have a varifocal camera and wondered if there is a way to use the camera to help understand what focal length camera would work.
So I was thinking rig the VF camera up, adjust focal length, and then see the focal length (by taking a snapshot or some other way?)
There doesnt seem to be a...
Hi
I wanted to swap out a camera for like for like and saved the configuration of the camera.
Installed the new one and tried to load the old config, but just get a failed message.
Its not the password as I deliberately entered a wrong password and get a different error.
I've save to the...
Thanks for this, a very useful guide.
Is there a way to use an iPhone to help understand the image you might get depending on the focal length of the camera?
On my iPhone 12 Pro, I can take a variety of zoomed in photos and then get the Focal Length from the photo.
I understand that a 35mm...
JB1970
Thank you so very much, I didnt have the "> Notification > Enable "Receive events and push notifications" ticked. I thought this was for pup up banners etc.
Again, thank you it is appreciated.
Thanks fullboogie and apologies if I caused any offence.
I do appreciate the expert advice that this forum can offer, sometimes an expert viewpoint can avoid hours or trying this and that.
I guess thats why its a forum rather than a manual!
I hope that as my knowledge increases I can offer...
Hi
"notify surveillance center" is now ticked and I have had some alerts but I still cant search some events.
I know its triggering events as i have the option "send email" set, and I receive emails, so it must be something else
Any other suggestions?
Hi
I have Hik-Connect working great on my phone and ipad when I am away from home.
I can view and playback all the cameras.
What isn't working is the Event Playback function - it just shows "no events"
The events are correctly set up and when I use ivms (on the home LAN) then I can search...
Hi
I've a couple of questions to help my setup, not sure if these are better placed as individual questions or combined (apologies for any etiquette mistakes)
Capture settings
The setting under : Storage : Schedule Settings :Capture
I don’t understand what these are used for, can you use it...
Hi
We have success.
I checked the SADP tool and the cameras were online. THey had defaulted to a xxx.xxx.254.x address.
I assume that when the bridge came on the 2nd NVR "grabbed" them and allocated an IP address to them. Not quite sure how or why, but I reset to DHCP and then allocated a...
Thanks again for your continued efforts.
I was beginning to think that Netgear Switch had failed as everything that is connected to that switch has failed.
As for the Nanostation Bridges
This is Router Side
This is the “far” side