Door Entry KV6113-WPE1(C) - New Firmware [3.7.0_250317]

[JB1970]

I just noticed that new firmware has been released for the KV6113WPE1(c). I've not seen any release notes but the version has jumped from 2.2.78 to 3.7.0 so I'd guess there are some major changes? It's available on both the UK and Global Hikvision update search pages.

Edit: I updated mine and it's a completely new modernised interface (which actually works in MacOS Safari!):

 

[JB1970]

Not a great start...

1 - A call from the unit comes through on Hik-Connect but the video won't load (may be a temporary glitch)
2 - The camera is no longer working with the NVR (M Series). It shows offline in Access Control Devices. Deleting it moves it into the online device list but whether using the link for quick add or manually adding it, it immediately switches to 'offline' once added

The specific error is "failed to get channel parameters or device capabilities (0x1a1009)'

 

[JB1970]

This firmware version seems to be problematic.

On (at least) the M series NVRs, the device can no longer be added, unless adding as a video device and using Hikvision RTSP protocol (confirmed by several other users). This intercom firmware update appears to have undone the fix for this issue that was previously resolved by M series NVR firmware version 5.04.050.

Despite reboots and power downs, call connectivity to Hik-Connect is an issue for me. The call comes through to the Hik-Connect app, but when attempting to answer the call from the app, the call does not connect and the video does not load. I can manually connect to the device and stream live and the notification, along with a snapshot of the caller is available (despite the call being unanswerable). I'll perhaps delete and re-add the device to Hik-Connect but if that doesn't work it'll be a roll back to 2.2.78.

 

[Ensthor]

Just updated my kv6113-wpe1(c) to this firmware to check new features, but I just can't connect it to my wifi network, clicking connect just does nothing. Anybody else faced with this problem?

 

[trempa92]

I have no troubles with new firmware. Calling works normally. Tested on KD and KV units.

But i havent tested adding to NVR, i presume since it took AccessControl firmware base it will be problematic as K1T502 to add to NVR.

It became ISAPI based rather than SDK based. I Believe NVR's will get new firmware to support adding device via ISAPI protocol. Same as HikCentral have for such devices