Search results

From reading the datasheets it may work as you have suggested, however, the specs for the camera say that the max power is 24w which is higher than the max that the controller can supply. Is Solar your only option and does it need to be PTZ cameras?

Hi Jami Are you able to help me with something like this please. If so can you email me dturtill@gmail.com thanks

It will use 4 Channels on your NVR (one per camera) I can't see any issue with it on that NVR I have 4 connected to a DS-96128NI

Morning We have an electric Barrier that controls access to our car park. Currently, this is done via a Paxton card reader. I am looking at adding ANPR to this. I know that there is a way to link a single ANPR camera to a Paxton controller but wondered if anyone had set on up via ANPR and...

I did take a look at that thread but it doesn't seem to offer anything in relation to this camera model

Morning I have 4 DS-2PT5326IZ-DE around the corners of a building, unfortunately they don't have certain functionality (like smart tracking) so I am trying to get Motion detection setup on the fixed cameras with the PTZ then calling specific presets before then going back to a 4th preset. I...

Morning I Have 2 DS-2CD7A26G0/P-IZS they are both showing firmware version 5.6.11 yet I have found 2 possible links to ANPR firmware but neither one is this high...

Morning all Has anyone ever been able to configure a camera to detect tailgating? I have an ANPR camera on an entrance to a secure car park and that is working fine but would like to know if there was a way to detect tailgating (like a line crossing event or something with a minimum time...

The same version as you and it works correctly so looks like we have a bug in the new version Just testing all the events to make sure they all show now but thanks for your help

Im on 3.5.0.7 May try an older version see if its a bug in this version

It cant be the camera as per the last note same camera 2 different events one showing the event time as correct the other showing it as plus one hour, all devices are fully up to date. also tried it with the camera directly as opposed to through the NVR and same result a vehicle detection event...

Further to this it seems to be certain events that are an hour fast the below is the same camera but 2 different events.

Installed on another machine and getting the same issue. Certain cameras are giving incorrect time by 1 hour even though they have DST set in there own web options and the NVR, and they are giving the right time on the image itself

yep. Going to install on another machine and test

So All DST is set the same, the time shows correct on the camera, it shows correct on the NVR If I check the event in the NVR web gui it shows correct. the only place it isn't showing correct is on IVMS. I have rebooted IVMS to no difference and other cameras in the same NVR are showing right...

that's what i was thinking but the system logs in IVMS are showing the right time, and its also not on all cameras but all cameras are on the same NVR

i have had a look at the DST will double check each camera the image from the camera shows the correct time 11:00:29 but the event time shows one hour ahead

Morning I am setting up events from my NVR to IVMS and on some of the event times its adding an hour where on others it doesn't the image for each camera shows the right time so cant figure it out Also for the cameras with the right time it will show the video of the event but the ones with...

Thanks, Dan. I thought that would be the case but it's good to have my point of view backed up. Just out of interest what would you consider reasonably priced (if money was no object could you recommend a camera please)

The current example that he quoted was 100 m from the camera. the area is a hard one as it is a construction site this is an example image that they wanted to zoom in on the branding on the jackets (i have cropped it slightly)