mollybolly
New Member
- Messages
- 1
- Points
- 1
IP Addresses Confusion with Intercom System running on POE + DVR Offline
Hi there eveyone, this is my 1st ever post and im a newbie and my questions are surrounding a situation where NO Router and/or Internet is used at all and i am experiancing issues which i cant seem to resolve and i think it may have something to do with the sub-domain ip addresses not matching or something idk..
OBJECTIVE = to have the Intercom system fully working offline on the indoors station where i can view all DVR cctv images yet be fully ready for me to be able to give the POE switch Ethernet for the very odd occasion i may need to go away and thus be able to view the whole cctv setup remotely yet i don't want to set it up online at all as i intend to use the whole system offline 99.9% of the time with NO Ethernet connection to the internet etc.
CURRENT POSITION = i currently have a Hikvision 8CH DVR running on POC with the 12v power also connected as the POC doesn't seem to work, this DVR is connected to the POE Switch along with the Indoors and Outdoors Station (Intercom) and i can currently view all DVR images on the indoors monitor yet the DVR images have lots of distortion vertical lines on the left and right of the indoors station screen with the middle part clear viewing so not sure whats that's about as the Outdoors Station image is 100% clear and not distorted...
This setup took me weeks to figure out to get it to this stage yet i thought i now need to use the Hikvision Software so that i can update the intercom system and DVR system and hope to tweak more better settings as theres a few other issues like the front gate not opening unless someone rings the bell etc plus i thought i could also get it internet ready too so i downloaded the software and opened it up offline whilst connected directly to the POE switch and again tried directly with the DVR to the computer offline but the software doesnt pick anything at all up.
WHAT I HAVE
------------------
Outdoor Station = DS-KD8003-IME1(B-Surface)
------------------------------
POE Switch = DS-3E1105P-EI
------------------------------
Internal Station = DS-KH9510-WTE1 (B)
Main Door Station = 192.0.0.65
Local IP Address = 192.0.0.64
Gateway = 192.0.0.1
DNS = 8.8.8.8
DNS2 = 8.8.4.4
------------------------------
ETHERNET PATTERN = T568B
------------------------------
HIKVISION SOFTWARE = https://www.hikvision.com/en/support/download/software/ivms4200-series/
------------------------------
DVR = iDS-7208HUHI-KI1/4S(B)
Firmware Version = V4.26.011, Build 201109
HMS Version = V2.3.1
FD Version = V4.3.0
IPV4 Address = 192.0.0.35
IPV4 Subnet Mask = 255.255.255.0
IPV4 Default Gateway = 192.168.1.1
DNS Server = 0.0.0.0
NTP Port = 123
------------------------------
Home Network = 192.168.1.1
------------------------------
Hi there eveyone, this is my 1st ever post and im a newbie and my questions are surrounding a situation where NO Router and/or Internet is used at all and i am experiancing issues which i cant seem to resolve and i think it may have something to do with the sub-domain ip addresses not matching or something idk..
OBJECTIVE = to have the Intercom system fully working offline on the indoors station where i can view all DVR cctv images yet be fully ready for me to be able to give the POE switch Ethernet for the very odd occasion i may need to go away and thus be able to view the whole cctv setup remotely yet i don't want to set it up online at all as i intend to use the whole system offline 99.9% of the time with NO Ethernet connection to the internet etc.
CURRENT POSITION = i currently have a Hikvision 8CH DVR running on POC with the 12v power also connected as the POC doesn't seem to work, this DVR is connected to the POE Switch along with the Indoors and Outdoors Station (Intercom) and i can currently view all DVR images on the indoors monitor yet the DVR images have lots of distortion vertical lines on the left and right of the indoors station screen with the middle part clear viewing so not sure whats that's about as the Outdoors Station image is 100% clear and not distorted...
This setup took me weeks to figure out to get it to this stage yet i thought i now need to use the Hikvision Software so that i can update the intercom system and DVR system and hope to tweak more better settings as theres a few other issues like the front gate not opening unless someone rings the bell etc plus i thought i could also get it internet ready too so i downloaded the software and opened it up offline whilst connected directly to the POE switch and again tried directly with the DVR to the computer offline but the software doesnt pick anything at all up.
WHAT I HAVE
------------------
Outdoor Station = DS-KD8003-IME1(B-Surface)
------------------------------
POE Switch = DS-3E1105P-EI
------------------------------
Internal Station = DS-KH9510-WTE1 (B)
Main Door Station = 192.0.0.65
Local IP Address = 192.0.0.64
Gateway = 192.0.0.1
DNS = 8.8.8.8
DNS2 = 8.8.4.4
------------------------------
ETHERNET PATTERN = T568B
------------------------------
HIKVISION SOFTWARE = https://www.hikvision.com/en/support/download/software/ivms4200-series/
------------------------------
DVR = iDS-7208HUHI-KI1/4S(B)
Firmware Version = V4.26.011, Build 201109
HMS Version = V2.3.1
FD Version = V4.3.0
IPV4 Address = 192.0.0.35
IPV4 Subnet Mask = 255.255.255.0
IPV4 Default Gateway = 192.168.1.1
DNS Server = 0.0.0.0
NTP Port = 123
------------------------------
Home Network = 192.168.1.1
------------------------------