Search results

Hi I have Hik-Connect working great on my phone and ipad when I am away from home. I can view and playback all the cameras. What isn't working is the Event Playback function - it just shows "no events" The events are correctly set up and when I use ivms (on the home LAN) then I can search...

Thanks very much, a bit more tinkering and fine tuning!

Hi I've a couple of questions to help my setup, not sure if these are better placed as individual questions or combined (apologies for any etiquette mistakes) Capture settings The setting under : Storage : Schedule Settings :Capture I don’t understand what these are used for, can you use it...

Hi We have success. I checked the SADP tool and the cameras were online. THey had defaulted to a xxx.xxx.254.x address. I assume that when the bridge came on the 2nd NVR "grabbed" them and allocated an IP address to them. Not quite sure how or why, but I reset to DHCP and then allocated a...

Thanks again for your continued efforts. I was beginning to think that Netgear Switch had failed as everything that is connected to that switch has failed. As for the Nanostation Bridges This is Router Side This is the “far” side

I;m beginning to think that the Netgear must have somehow failed. It is in a "hard to get to" area, so will need to get to it to test when the weather is better. If anyone has any other suggestions then I'd be grateful for them TIA

Thank you so much. It’s the latest smart hub, that has the digital voice connection. (Sorry I’m out at the moment)

Hi. Thanks. The router is a standard bt hub. I don’t think I have changed any of the dhcp settings. The nano station is loco 5ac

Hi Please see the attached sketch - I hope this helps. The Cameras shaded Red are the ones that have failed. I can ping the Netgear Router - but not the cameras connected to it. THe Netgear seems to suggest that they are ok. See Pic below I assign IP to the device level and not Router...

Hi I need some help please. I had a 16 CH Hik NVR working perfectly with a static IP (192.168.1.88) and the cameras connected to a Netgear Managed POE Switch (192.168.1.235) and the cameras having static IP’s (7 hik 192.168.1.92/93 etc and 1 Axis Camera). On the NVR under Camera Management I...

Hi I had never tried it, so cant confirm if it ever worked in the past. I'll try some options and see how I get on. If anyone has any other ideas, shout up !

Hi I;ve a question on Hik Connect. The App works fine on my phone and I can view the cameras wherever I am. When I log into HikConnect via Web Browser (when not on the LAN) I can log in to Hik Connect ok and see the NVR. When I click the IP address it opens a new browser but fails to...

Sharing solution in case anyone has similar problem. I had an old BT Router Hub, so connected that to the NVR and connected my laptop wirelessly. Obviously no internet but it created a nice LAN which enabled me to do what I wanted.

Thanks - I suspected that was the case. I dont have a monitor to hand (will sort one) and was looking for a shortcut. Hopefully my wireless bridge will be working soon and I can just connect via webpage.

Hi Is it possible to connect a Laptop to a NVR via HDMI to view and control the NVR settings? Thanks

Thank you - that is most helpful, I will give it a go - before I do, I've a further question. Is there a way to tell if the Illegal attempt is from the Hik Connect software - I suspect that it is as otherwise someone would need to be on my LAN ? I don't have astatic public IP so I guess that...

Hi, I am also getting a lot of illegal login attempts. (100+yesterday) What ports should I change and to what value. Is there any impact that will make to me logging on etc?

Codlord, thank you, that makes sense. I had foolishly thought that ther might have been a way to connect to the stream. Ah well, worth a try. I might keep tinkering and if I work it out, will share with the group

Thanks Dan interesting. I can access the connected camera on a web browser by the method above http://IP_OF_NVR:65001 so logic would suggest that I just need to point NVR A at this IP - but I cant seem to get it to work. Any help appreciated!

Hi - I can access the camera via a web browser - fantastic. Next question. I have two NVR's Camera is connected directly to NVR A What settings do I enter into NVR B to connect to the Camera? I've tried putting the following settings into NVR B IP Camera address [nvr A ip:65008] Port 8000...