poe

Hi, I am needing to reset my doorbell via hikvision due to network changes. Forgot details of course, or cant get admin access. I have taken doorbell in from gate, plugged in lan to computer (and also tried a switch), and bell is dead and cant be seen in SADP. What am i doing wrong? I have...

I have inherited a no-name NVR system. It looks very similar to the Dahua NVR-E16L2P8. The only difference I can see is on my NVR the first 8 ports on the back have a shaded green background which I think has to do with the different power/watts allowed for the separated sections of PoE ports...

Power over Ethernet (PoE) and Ethernet over Power (EOP) are two technologies that have gained popularity in recent years. PoE allows network devices to be powered through an Ethernet cable, eliminating the need for separate power cables. EOP, on the other hand, uses existing electrical wiring to...

Hey folks so i got this hikvision poe switch DS-3E0105P-E/M(B) and was wondering, can i utilize this for non poe devices just to add them to the network. eventually the older cameras will be replaced with poe cameras but for now i just want to utilized it on the network via cable. the cameras...

Hi, I'm not new to CCTV, but I need help selecting a Hikvision NVR to use instead of using my Synology NAS and its inbuilt Surveillance Station. UK Based Current Setup Synology NAS running Surveillance Station 2 x Trendnet TV-IP310PI Both Running as POE to a Switch in the Loft Mobile App set up...

I would like to know which ethernet pairs (or specific strands) are used to supply power and data to the DS-KD8003-IME1. We ran a UTP cable to supply power and data to our outdoor station (the DS-KD8003-IME1), but forgot to run additional strands to connect the DS-KD8003-IME1 to the door strike...

I bought this NVR along with to POE IP cameras: https://www.shg-uk.co.uk/hikvision-nvr-4chn-4k-1080p-4-ports-poe-ds-7604ni-k14p-1503-p.asp I was looking at using these powerline adapters so I didn't have to run network cables everywhere...

Hello I want the basic working functionality of a video doorbell like Ring in Live mode to our phones but hardwired ( I can do this with Ring units with a transformer I know ). I also want continuous surveillance around the door stored locally on my Synology DS. I already use this for one...

Hi All, I hoping to find some help with my HIKVISION DS-2CD2725FWD-IZS camera. It has been installed and running completly fine for the past year or so. It is powered by POE via a tp-link TL-POE150s injector. This connects over my LAN to a HIKVISION DS-7608NI-K2 NVR. Around three weeks ago it...

I'm looking into setting up a CCTV system to monitor the exterior of my house. The neighbours car was recently vandalised during the night so that has spurred me on to get this sorted. 3 cameras should suffice, two to the front and one to the rear (at least for the time being) The front wall of...

Could you please explain to a newbie why he needs an NVR, assuming he has plenty of disk space elsewhere? To my idiot's eye, they must increase the live video lag by adding an extra layer of processing, and they make a noise. What camera or network functions do I lose by connecting directly to...

I've got a Hikvision DS-7608NI-I2-8P 8 Channel NVR, that's now been running for a few months since being installed with 3 PoE Hikvision Turret cameras. Due to an odd problem with 1 camera not generating Smart Event notifications for a few days, I had to look at the NVR configuration & check the...

When we first started selling Milesight their NVRs could manage 3rd-party cameras that were on your network, but the Milesight NVRs could not provide PoE power to 3rd-party cameras. Now though, with the most recent NVR firmware update*, the NVRs will provide power but to get it to work is a...

I have trouble finding correct poe. One of Hikvisions spesification is like this Power Supply: | 12 VDC ± 10%, PoE (802.3af) Power Consumption: | Max. 20.7 W Another - poe 12 W. This camera has IR and heather. Further I cannot find if a poe is included in the camera-pack. I need help.

So I have installed on Hikvision DS-2CD2142FWD-I PoE camera at my relatives connected to a TP-Link TL-SF1008P 10/100 PoE Switch. Cable run from switch to cam is with 24AWG solid copper Cat 5E cable at about 10 meters in length. I tested the cable after I terminated it with a cheap and simple...

hello all Newbie to the CCTV world but in the process of buying a new house and want to add CCTV. I was thinking 3-4 cameras for the external, 1 for the front door with maybe a small screen inside and 1 camera in the Garage. I am already doing my plans for the Cat 6 network I want in the...

Hello forum, I have a few PoE devices (phone, panasonic cctv and Hikvision DS-2DE5184-AE outdoor PTZ IP). I would like to drive them all with a single PoE switch. I've tried two different PoE switches that had sufficient power (30W / port) but they are not registering the Hikvision. Is this...

I got an EZVIZ NVR PoE ip camera setup 8ch/4cameras 1080p. I need to add 2 more cameras but yhe EZVIZ options are overpriced. I noticed that HikVision cameras are cheaper. Will they work with my setup? Will the 3k option work with my system?

Hi I have some inquiries and I wanted to ask what is the possible solution to extend the IPCam to more than 100 meters from the NVR. Target quantity is about 50 to 55 IPCameras all in all This will be a combination of multiple 16-port NVR. All NVR must be accessible from the internet and...