motion detection

What is Motion Detection and why is it useful? Motion detection is one of the easiest events to set up and will notify you as soon as a person or vehicle enters a predefined detection zone in your scene. Traditionally, it would just rely on lots of pixels changing between frames in your camera’s...

Hi – I recently added a Hikvision doorbell and indoor station (DS-KV6113-WPE1(C) and DS-KH6320-WTE1). This adds to a system including a DS-7616NI-I2/16P NVR and 10 various Hikvision cameras. The doorbell is set up and rings through to the indoor station. All the other cameras are also added to...

Hi. I have this iDS-7208HUHI-M1 (s/a) unit, which has a weird problem. I've used the unit as 0-24 recording at my parent's house but wanted to save some HDD and I've tried to set it up to record only if motion detected on some channels. The DVR has "I" functions so it can filter...

Hi there I've tried finding an answer in the How-To section here, and have watched several videos, but can’t find my issue anywhere. I've set all the parameters according to instructions, but I'm not getting the right result. Perhaps there's another troubleshooting guide someone could point me...

I have a problem with several Hikvision IP Cameras. The problem is that I would want it to record all actions when motion detection occurs, but instead there are 10-20sec pauses (so no file containts that footage) between the video files it records on SD card, and this is not because there was...

I have just moved up to an 8 channel DVR, (Analogue). My old 4 channel hybrid was used to monitor the wildlife in the garden and side passage. I used to pick up hedgehogs, my main interest. My 'Newer' 8 channel analogue can not pick up hedgehogs. Under infrared light, grey hedgehogs, grey path...

Hi there, On the front of my property I have 2 Hikvision ColorVu cameras (DS-2CD2347G2-LU) and a Hikvision doorbell/intercom (KV6113-WPE1). All are connected to the network and recording on the NVR (Hikvision DS-7604NI-K1/4P(B)). I have played about with the motion detection settings for the...

Morning I have 4 DS-2PT5326IZ-DE around the corners of a building, unfortunately they don't have certain functionality (like smart tracking) so I am trying to get Motion detection setup on the fixed cameras with the PTZ then calling specific presets before then going back to a 4th preset. I...

Hi, I have a Hikvision DS-7608NI-I2/8P NVR with 4x Hikvision DS-2CD2386G2-ISU 8MP AcuSense Fixed IR Turret Network Cameras. The 4 cameras connect to a POE switch, which connects to my router. The NVR also connects directly to my router. I have a few questions in addition to the motion...

Hi All, Ok, So in no way am i new to Hikvision kit but this is driving me nuts, since updating our DS-7608NI-K2 / 8P recorders to v4 firmware (200628 & 200803 to try and fix the issue) you no longer get the motion alert tags on the slider at the bottom to show when motion has taken place in the...

Hi Yesterday, in my work I saw, that nvr can record continuously with green "tics" or tags or whatever on timeline ( when something move). I found some topics on internet, but nothing (like video) about how to set it Up. Another question is, will This "marks" be visible in web browser or even...

Hi all, I would greatly appreciate some advice. I know that reolink cameras are not thought of highly but for me they do the job, or at least they did. I purchased 2 x 410 5mp cameras for front and back of the house. Pictures are very good, day and night. I have been recording 24/7 onto a...

Hi, I have a uniview NVR the NVR208-16S and 12 cameras all the IPC3612ER3-PF28 I have noticed a problem with the motion detection, when recording it detects motion and begins to record for approximately several seconds. It then stops recording while motion is still occurring, and only resumes...

Any hints on getting motion detection to work effectively? I've got an NVR (4 port K series) with 2 cameras. I've tried to set up motion detection, and initially got a continuous stream of events, which appear to be leaves on a bush... I've backed the sensitivity way down, and now I'm not...

I have configured a DS-2CD2332-I for ftp transfer. I can see motion detection but nothing ends up in the ftp folder. I have done the FTP test and a test file is created. So ftp is working. I can capture and video, the files are transferred, but somehow motion detection, line crossing, and...