hikvision

Hi, I have multiple Hikvision IP camera’s and have always used them for multiple detections, alerted by mail. Until recently I have used my own non-SSL domain / mailserver and it worked fine. Now I have moved to another hosting provider and the same domain is now with SSL. No matter which...

Hi all I write here because I have a problem with new Hikvision firmware for G5 platform. I usually use this type of cameras: DS-2CD2086G2 In the first cameras that I bought, i usually change the firmware with this version...

Hello everyone. I'm working on a project that includes one main gate and one main door with a magnet lock. I need to add a trade button (tradesman) below the main camera, for example. And if you press a Trade button (below a camera), the gate will open at a predetermined time. I'm...

Hi, I am using Acusense camera with non-acusense NVR 7616NI-I. Most of the smart events settings seems to configurable from both NVR and camera. Some of them seems to be independent configurations in Camera and some of them, if configured in NVR will reflect in Camera too. For example...

I updated the firmware on one of my NVRs DS-7616NI-K2 from V4.31.105 build 210727 to V4.71.005 build 220524 Firmware from the UK portal here. NVR seems fine but straight away one of my ANPR cameras went into constant boot loop. All cameras are connected via network NOT direct to NVR...

Hello, 'Hope you are all well. I have a Hikvision/Hilook NVR-108MH-D / 8P NVR, three Hilook cameras and a stand alone Reolink camera but am looking to get a better NVR with a modern interface, better motion detection and better browser support. I've found the NVR has missed critical footage...

Hi, First post here so apologies for any newbie mistakes. Normally I can sort out the basics with our HikVision setup but we've just switched BB providers and have a new router. I've set the SSID and PW the same as the previous provider to try and make a seamless switch over, rather than...

Hikvision has released new firmware for their G5 Series IP cameras. The latest firmware, Version 5.7.10_SP, can be downloaded here. (NB - Firmware is only currently available from the camera product pages on the Hikvision website, we have linked to one specific product but if you look at the...

For the last 6-7 years the go-to NVRs from Hikvision have been the K-series & I-series models, these have been a sturdy range of NVRs that (for the most part) have worked really well. Recently though, we have started to see a growing number of issues with running the 8MP AcuSense/ColorVu models...

Hello All, We want to install 8 cameras with human/vehicle detection and line crossing. If possible , for cost effectiveness, we want to use 5 cameras with AcuSense and other 3 Normal IP Cameras with AcuSense enabled in NVR. If that isn't not possible, we want to go with all 8 AcuSense cameras...

hello everyone, I’m slowly updating the full house with hikvision (have the nvr and poe etc). We have a Google nest doorbell, it’s hard wired into a transformer and a hard wired doorbell chime, it’s powered by the standard 2 bell wires. I’m after changing this to a hikvision villa series...

Hi everyone, im an owner of an NVR DS-7604NI-K1 / 4P with two colorvue camera's DS-2CD2347G2-LU. This is the first time i have owned camera's so im still looking to get the best set up. I watched several turtorials and set up te config as showed (and i think is suitable vor my situation). In...

Hi, I have got a setup of Hikvision people counting camera (DS-2CD6825G0) connected to Hikcentral. The count reporting works fine. However, two more reports are also regularly sent. Those are OnlineOfflineStatus report & RecordingStatus report. I didn't set up those two. I searched the camera...

Hikvision TandemVu Cameras Hikvision's range of TandemVu Cameras were designed to combine the use of PTZ and Bullet cameras. With this capability, TandemVu Cameras can hold overall, panoramic views (using the Bullet lens) even during pan, tilt, and zoom manoeuvres (using the PTZ lens), so you...

Hikvision HeatPro Cameras The New HeatPro Camera Series, from Hikvision, is a range of thermal cameras equipped with temperature detection technology (allowing for impressively sensitive fire detection), a variety of deep-learning video analytics, and accurate perimeter protection. Note: The...

Since updating to firmware V1.2.7 the other day I get the following message ‘Please contact the installer to confirm the alarm restoration’ Issue is i am the installer as I self installed and was working perfectly I can manually set each of the 10ish zones but can’t do them all from...

Hikvision has released new updated versions of the iVMS-4200 (V3.8.0.4) and iVMS-4200 AC (V1.8.0.4) software. Attached are the release notes for both versions covering all the added and updated features.

The url `/ISAPI/Event/notification/alertStream` gives me the wrong value in the <channelID> field when I set the checkbox for target detection to Human. If it is not checked and just the default motion detection is on. I get the correct channelID. When the alertStream gives me the wrong...

To use a Gmail account to send you CCTV equipment’s email notifications, you now need to set up a unique third-party app password for it. Most other email providers still allow third-party apps or devices to use your account with your normal password for it, but Google no longer permits this as...

Hi, I have a DS7608HUHI-K1 DVR which is password locked. I have tried to reset the password on the device using TFTP on IP 192.0.0.128 but the DVR does not request the file when turned on. I have then connected to the device using the 4 pin connection to force the device to request the firmware...