hikvision

Hi, Anyone knows whats up with the hikvision firmware portal? All the files have been removed and replaced with 3 tools, SADP, Batch Config and MVA. link is here https://www.hikvisioneurope.com/uk/portal/ before you could individually download the firmware for your device type. Hope this is...

I am looking to install two ip cameras on the front gate. Camera 1: The way to my home main door is through the alleyway and distance from black gate to alleyway is 10ft in length marked in blue arrow and is 6ft wide(yellow arrow) so I was thinking of installing camera 1 here to capture all...

Hi, I am trying to download some video footage for the police and am really struggling to actually get the video to play. I am on a mac and i have been able to view the footage on ivms-4200. I have also been able to download that footage to a file (.mp4) but cannot get this to show any video...

I am trying to test my attendance device of hikvision. Model: DS-K1T341AMF I want to get event which show the list of event that have a check in and check out event here is the sample response: { "AcsEvent": { "searchID": "1", "totalMatches": 72, "responseStatusStrg": "MORE", "numOfMatches"...

I have a total of 8 cameras (2mp-1080p) and 1 IP (2mp-1080p), (its model is DS-2CD1323G0E-I hikvision) when I see all the cameras at the same time (sub-stream) my IP camera looks very bad, then I look at its configuration, and it puts a very low maximum Bitrate between 30 and 100 (attached...

Hi there, Is it possible to recover footage after it was overwritten? Say it has a 7 day retention policy and 30 days later you need access to overwritten footage, can I recover it, or can hikvision recover it? Thanks!

Greetings, I'm in the process of planning a surveillance system installation for my home and have been in touch with several local dealers. During the construction of my house, seven mounting points were designated for cameras, although no wiring has been done yet (such as Cat6, etc.). One of...

Need cameras for side alleys of our house. Both alleys have lighting at night and I currently have DS-2CD2043G0-I. They do an ok job at night, by lowering frame-rate and enabling WDR (but stay in color mode because of alley lights) but I've been thinking about upping the resolution to increase...

Hello everyone, I've been struggling with a camera setup issue and I'm hoping to get some assistance. I recently purchased a DS-2CD2147G2-SU camera with the intention of using its facial comparison feature in my shop. The idea was to identify individuals, especially potential shoplifters, and...

Hi, I have a Hikvision DS-7608NI-K2-8P and its just started to reboot every 15 to 30 minutes. Some logs say "abnormal shutdown", but now seeing "System Running State". It's 3 years old, and lives in a data cabinet with fan ventilation. I thought it might be over heating, so put it on the bench...

Good day Please see if you can give me a method and confirm firstly if it's possible to have the following: 32ch NVR at HQ Offices on switch Some IP cams at HQ connected to same POE switch as NVR I plan to add some IP cams at remote sites of ours. Cams will be on a different subnet by...

I've just spent 5 hours trying to figure out the difference between 3 identical cameras and why they won't all work with the same my NVR. My NVR is a DS-7732NI-14/16P running V3.4.95 Build 170626 - serial number indicates RR. The cameras are all DS-2CD2346G2-IU and all serial numbers indicate...

Hello, We have hikvision IP cameras Pro series installed and we already installed NX witness pro. we tried to setup an intrusion detection event but there is no luck getting any notification on the VMS. Are there any special settings to be configured on the camera side? your help is highly...

All Hikvision users will have seen that when you first log in to a camera the live view will have overlayed text stating the date & time and the default name of the camera "IPcamera 01", depending on your requirements you may want to change some or all of this overlay text and below is the...

I am planning to purchase DS-7616NI-Q2 NVR and 16 Acusense cameras. Since NVR does not support Acusense, Will all the functions works regarding Acusense including alerts?

Hi, Does anyone know the process to firmware flash one of these devices? I have tried TFTP server on 192.168.1.128 and 192.0.0.128 and nothing happens on load up. I have connected via JST 4 pin to see if I can force update by pressing Ctrl + U on startup, but on this device it says press any...

Hi all, I have just bought a new setup, DVR: HikVision 7200 Series Camera: HikVision ColourVu (Model: DS-2CE72KF0T-FS) At night it has a light on constantly and i would like to turn it off, Ive seen lots of posts on how to do it on the Day/Night Switch settings but when i go to my settings a...

Hello all, I have a problem with not being able to "remote configure ip cameras connected to the NVR" (as pictured below) in the Hik-Partner Pro i have tried being an installer and end user This is completely different to the "cameras configuration" under the NVR side of camera settings, I...

Hi, I want to get a smart door bell and already have a HikVision camera setup, ColorVu + DS-7608NI-K18P NVR So I though getting a HikVision doorbell would be the way to go as I am familiar with some of there products and already use Hik-Connect mobile app. I live in an old house so there is...

Hi there, i'm an installer of hikvision products camera and ax pro, im facing an issue now with the ax pro wireless magnet detectors, they are all flashing orange light im not able to enroll them to the central as the orange light is for a low signal, i don't know how to improve the signal to...